For someone who’s new to networking, the differences between gateways and routers can often be confusing. In this article, I’ll attempt to shed some light on these differences.
What they have in common
Before you can talk about the differences between gateways and routers, it’s necessary to understand what they have in common. Both devices are used to regulate network traffic between two or more separate networks. You do this by installing at least two network cards into the device and placing the device between the two networks you’re trying to regulate. This process involves attaching one network card to each network.
And the differences are…
That’s where the similarities end, however. Gateways regulate traffic between two dissimilar networks, while routers regulate traffic between similar networks. The easiest way to illustrate this point is through an example. Suppose you have a Windows 2000 network that’s using TCP/IP as its primary protocol. Because TCP/IP is also the primary protocol of the Internet, you could use a router to connect your network to the Internet. The router would ensure that:
- · Traffic intended for the local network doesn’t bleed onto the Internet.
- · Traffic residing on the Internet that’s not specifically intended for your network stays on the Internet.
Of course, routers can also be used to segment traffic on corporate networks. This feature is useful on really big networks when you need to reduce the amount of traffic flowing across the network. You can use a router to divide the network into segments and thus allow only traffic that’s specifically intended for a different segment to flow across the router.
A gateway, on the other hand, joins dissimilar systems. The best example of a gateway would be a device that joins a PC network with a 3270 mainframe environment or a device that allows a Windows NT network to communicate with a NetWare network. Although a gateway can be used to reduce network traffic, it’s more often used to make communication possible in dissimilar environments.
Brien M. Posey is an MCSE who works as a freelance technical writer and as a network engineer for the Department of Defense. If you’d like to contact Brien, send him an e-mail. (Because of the large volume of e-mail he receives, it's impossible for him to respond to every message. However, he does read them all.)The authors and editors have taken care in preparation of the content contained herein, but make no expressed or implied warranty of any kind and assume no responsibility for errors or omissions. No liability is assumed for any damages. Always have a verified backup before making any changes.