The HTC Flyer is the company’s first effort to grab a piece of the tablet market. This 7-inch Android device has several nice tablet features (a touchscreen that supports both a digital pen and your finger, a 1.5GHz processor, and 16GB of storage). But after cracking it open, the Flyer looks more like an over-sized smartphone than a built-from-the-ground-up tablet.
The Flyer is available for $499.99 (US) from Best Buy. The current versions only support Wi-Fi connectivity, but HTC plans to launch 3G models later this year. The Flyer weighs just under a pound (14.82 ounces) and measures 7.7″ (H) x 4.8″ (W) x 0.52″ (D).
Full teardown gallery: Cracking Open the HTC Flyer
Cracking Open observations
- The case is easy to open and HTC used Torx T5 screws throughout the Flyer.
- Despite being relative easy to open, the Flyer is difficult to disassemble.
- You must disconnect several ribbon cables to replace the battery.
- You must loosen or remove the main PCB to remove the speaker and vibration motor assembly.
- The Flyer contains multiple PCBs that are connected via ribbon cables. This increases the potential failure points.
- The antenna wires are soldered to points on the display assembly.
- Compared to other tablets (Apple iPad 2, HP TouchPad, Motorola XOOM), the Flyer appears to have an inefficient internal design.
Our HTC Flyer test unit had the following hardware components:
- Qualcomm 1.5GHz processor
- 5MP rear-facing camera
- 1.3MP front-facing camera
- microSD card slot
- 1,024×600-pixel-resolution screen
- Wi-Fi 802.11 b/g/n
- Elpida B8064B2PB-6D-F DRAM
- Samsung KLMAG4FEUA-A002
- Qualcomm QTR8200 RF Transceiver
- N-trig DuoSense integrated pen and multi-touch solution
- Silicon Image SiI9232 MHL Transmitter
- Teas Instruments TLV320AIC3254 (AIC3254) Ultra Low Power Stereo Audio Codec With Embedded miniDSP
- Texas Instruments TPS8903AE Power Management
Smartphone in tablet’s clothing
You can tell a lot about a company’s roots and vision for the future by cracking open its products. For example, Apple’s changes to the internal design of the iPad show a trend to produce disposable, rather than repairable, tablets. This is not surprising given the Cupertino company’s history with the iPod and iPhone. On the other hand, HP’s TouchPad is built more like a PC and straightforward to repair. This too seems appropriate given HP’s history in the PC market.
I was therefore, not surprised by the internal design of the Flyer. The Taiwan-based manufacturer got its start building pocket computers and PDAs. But for the past decade, it focused almost exclusively on smartphones. HTC is one of the world’s top five smartphone vendors. This smartphone know-how comes through in the Flyer.
On the inside, the Flyer looks more like an over-sized smartphone than a built-from-the-ground-up tablet. For example, parts are stacked on top of each other and removing one component often requires removing or loosening two or three others. The antenna wires are soldered to points on the front panel assembly. And, the display and digitizer are difficult, if not impossible, to separate without damaging them.
Rushed design process?
Given the Flyer’s jumbled hardware arrangement, one can’t help wonder if the device’s design process wasn’t rushed. Leaning heavily on their experience building smartphones may have helped HTC bring the Flyer to market quickly, but designing a tablet from the ground up may have produced a better device.