In July 2011, Apple released the 3nd generation MacBook Air. As with the 2nd generation Airs, the 2011 notebooks are available in 11-inch (A1370) and 13-inch (A1369) models. The 2011 MacBook Air is available in four basic configurations-11-inch with 64GB of storage, 11-inch with 128GB of storage, 13-inch with 128GB of storage, and 13-inch with 256GB of storage. Within each of these divisions, you can further customize the processor and RAM.
Our $1,199 MacBook Air (11-inch) came with a 1.6GHz dual-core Intel i5 CPU, 4GB 1333MHz DDR3 SDRAM, 128GB flash storage, Intel HD Graphics 3000 processor with 384MB of shared DDR3 SDRAM, and an 11.6-inch LED-backlit display. Apple added a Thunderbolt port to the 2011 MacBook Air.
We cracked open the 1st generation MacBook Air (released in 2008), 2nd generation 13-inch MacBook Air (released in 2010), and the 3rd generation 13-inch MacBook Air. Given the near identical external appearance of the 2011 and 2010 models, I couldn’t wait to see if they were equally similar on the inside. They are, but the 11-inch Air’s smaller case requires an highly-efficient hardware layout.
Full teardown gallery: Cracking Open the Apple MacBook Air (2011 11-inch)
Cracking Open observations
- Tamper-resistant external screws: As on the 2010 MacBook Air and some iPhone 4’s, Apple used tamper-resistant pentalobe screws on the 2011 Air’s bottom cover. You can remove them with a small flat-head screwdriver, but you risk damaging the screw heads.
- Nearly identical internal design as the 2010 Air: The 2011 MacBook Air’s hardware layout is nearly identical to that of the 2010 model. The motherboard has a slightly different chip configuration, but is the same general shape and size.
- Integrated graphics processor: Our 11-inch 2010 Air had an NVIDIA GeForce 320M GPU. Apple switched to Intel’s integrated HD Graphics 3000 processor for the 2011 models. This change gave Apple room on the motherboard to include the Intel E78296 Platform Controller Hub, which likely contains the Thunderbolt controller. It also meant Apple could shrink the internal cooling assembly.
- Many components are identical to the 2010 Air: The 2011 MacBook Air uses many of the same chips as the previous model, such as the Broadcom BCM5976A0K, Cypress CY8C24×94-24L PSoC, and Cirrus 4206BCNZ audio controller.
- Ultra-efficient internal design: In most respects, the 11-inch Air is just a smaller version of the 13-inch model. The internal hardware layout is nearly identical. The motherboard and left-side PCB are the same general shape. And, both have many of the same components. Packing all this hardware into a case that’s smaller by one inch from side to side and almost one and a half inches front to back, requires an ultra-efficient internal hardware layout.
Our 11-inch 2011 MacBook Air test machine had the following hardware:
- 7.3V 50Wh 6700mAh Li-ion battery
- 128GB Samsung SSD (Model: MZ-CPA1280/0A2)
- Broadcom BCM943224PCIEBT2BX miniPCIe wireless card
- Delta Electronics 0.35A Cooling Fan (Model: KDB05105HC-HM04)
- Cirrus 4206BCNZ audio controller
- SST 25VF020 20-4C-QAE 1052Y1E-AB
- Cypress CY8C24×94-24L PSoC
- Broadcom BCM5976A0KUB2G
- 1.6GHz Intel Core i5 Processor-2557M with integrated Intel HD 3000 graphics
- Intel E78296 Platform Controller Hub
- Intel DSL2310
- Texas Instruments 58864D
- Fairchild AB22AF FDMS 0355S and AB21AK FDMS 0348
- Samsung K4B2G0846D DDR3 SDRAM (4GB)
- MAXIM 15092G
- Intersil 80 14AIRZ F119HH
- Texas Instruments 51916
- SMSC USB2513B USB 2.0 Hub Controller (x2)
- SMSC 1704-2 146696C CMY
- F2117LP 20H RVP AE0268 1111JPN
- 25Q064A 13E40 99 PHL 7B122A2R66
- Texas Instruments TPS 51980
- Intersil 625 9AHRTZ F120BR
- NXP 1112 /A 11231B
- 14AD D68B
- 3148V 1R603 MPA
- Linear Technology 121 3957 B28281
- Parade PS8301 U08FUC ARTFH 2011 A2
- NXP 04DP081A 1238.121 ZSD120
- Texas Instruments SN1010 017 TI 17K ATRP