Discussion on:
View:
Show:
Currently in AARGEE SYSTEMS as an (HP Compaq)Desktop support engneer& Posted as a resadencial engineer for Infosys Technologies Pune from last three months.
The link is in the article, but send me a private note and I'll email you the link.
Hi,
I downloaded the excel sheet.But I am not able to generate the code for the ios.
I downloaded the excel sheet.But I am not able to generate the code for the ios.
I would like to know in depth about the working of IPSec VPN, whole about it.....how the authenthication , encryption and creation of the tunnel is happening.
This spreadsheet seems to create the commands for one of the two routers. What has to be done on the router at the other end ?
Exactly the opposite of the original...
Change the IP Address. Everything else is the same.
In other words, to make is simple "S", change the ip address and click replace again. There is your end router config for the tunnel.
Change the IP Address. Everything else is the same.
In other words, to make is simple "S", change the ip address and click replace again. There is your end router config for the tunnel.
ok, to add complexity to this:
Site A has static IPs and nat'ed servers
Site B has dynamic IPs and another server that needs to be nat'ed from Site A's block of IPs. I can see where traffic destined to the server at Site B reaches there, but how to get it back across the VPN and not out the split tunnel at site B?
Site A has static IPs and nat'ed servers
Site B has dynamic IPs and another server that needs to be nat'ed from Site A's block of IPs. I can see where traffic destined to the server at Site B reaches there, but how to get it back across the VPN and not out the split tunnel at site B?
The "download it here" link doesn't seem to work anymore. Where can I get a copy of the Excel spreadsheet?
Thanks a bunch!
Thanks a bunch!
When client successfully connect via cisco VPN client into our network from other outside network (via cisco router 871), it receive correct network parameters except gateway... also - connected client can't see anything in our network: can't ping any address inside...
Where the problem can be?
Where the problem can be?
this is nice and iam looking forward to receiving mre of this.
hi...can provide full example of ipsec configuration?thanks
Please send me the configuration ,i ll like to have a look on it because i m facing the same problem
VPN provides the IP to the Clients But they are not able to communicate with my Local area network. A huge problem is occour because my exchange is not connected to the VPN users.
I did follow the companion, but when chose the yearlow section, i can't use the Replace button. Pls tell me how to overcome. Thanks!
You need to drop the macro security level down. It's set too high by default for most macros to run.
definitely a very good tool. it would be great if you can include NAT as it used in my environment when configuring VPN.
i followed this sample, but hosts at both ends can't ping each other.
the only commands i added to configuration, is the setting up of interfaces address.
may be do i have to create tunnels interfaces?
do i miss something?
the only commands i added to configuration, is the setting up of interfaces address.
may be do i have to create tunnels interfaces?
do i miss something?
- Keyboard Shortcuts:
- Prev
- Next
- Toggle
