The free Untangle Firewall/UTM has Open VPN built into it. Even if that's the only thing you use Untangle for, it's pretty simple. Just add a user and email them the OpenVPN executable or the key config file.
I know there are a few other firewall distros like pfSense that also have OpenVPN built in.
Discussion on:
View:
Show:
OpenVPN is pre-installed in OpenVPN and Endian Firewall.
You can also use OpenVPN on TCP port 443 so that it passes through most Corporate Firewall rules.
You can also set it up on UDP 53 if you want to pass through most WiFi hot spots...
You can also use OpenVPN on TCP port 443 so that it passes through most Corporate Firewall rules.
You can also set it up on UDP 53 if you want to pass through most WiFi hot spots...
This works very well and is easy to setup.
I now use Teamviewer, I've changed to it recently just because it has zero setup and it has vpn/remote/presentation and its secure.
Open ssh/vpn and cygwin are kings at what they do, but only if you have patience and some knowledge at what you are doing.
Whereas Teamviewer just runs from an exe without even installing it in seconds.
Take a look at the program and you will get what i mean.
Open ssh/vpn and cygwin are kings at what they do, but only if you have patience and some knowledge at what you are doing.
Whereas Teamviewer just runs from an exe without even installing it in seconds.
Take a look at the program and you will get what i mean.
I am in the midst of replacing a brand new RV120W Cisco Small Business router because it is failing on all levels of reliability. One of the main reasons why I purchased it was the Quick VPN client that came with it.
Untangle can also be used as a router correct? And does it configure the Open VPN exe for you based on your pre-defined settings? Would it be just as easy to setup for the end user as the Quick VPN client was?
Untangle can also be used as a router correct? And does it configure the Open VPN exe for you based on your pre-defined settings? Would it be just as easy to setup for the end user as the Quick VPN client was?
And it is a nifty vpn solution. A while back I tested site-to-site with openvpn and ipsec on openbsd and, using the same encryption algorithms, ipsec outperformed it with regards to latency. However, it didn't blow it out of the water. I still use the baked in ipsec on openbsd for site-to-site but all road warrior vpn's are openvpn.
I've never trusted all the appliances available. Call it paranoia but I always have that nagging, "What might they be up to" feeling.
I've never trusted all the appliances available. Call it paranoia but I always have that nagging, "What might they be up to" feeling.
A topology view would be very helpful for this. It is one thing to have the text statements like you do, which I feel are good. Adding a drawing makes it visual and far more helpful to many of us.'
Thank you.
R,
-Joe Wulf
Thank you.
R,
-Joe Wulf
I have openvpn running behind a verizon fios router. Remotely, I can access the network resources just fine, but if I push the redirect-gateway option and DNS servers in order to route my entire connection through the VPN, with the routing set up on the Fios router, I cannot get to the Internet. So all I can get working is split-tunneling. Anyone else have any experience with Verizon Fios and openvpn?
Excellent Article, looking for help in setting up Open source VPN server and the article published at just the right time.
Thank you for sharing.
Rakesh Dhyani
Thank you for sharing.
Rakesh Dhyani
We've been using it for about 5 years to allow our Windows/Mac/Linux clients to connect to the LAN over the internet. It's pretty much rock-solid and has required very, very little maintenance as far as I can remember.
We run it as a VM on Ubuntu Server LTS, it requires little in the way of memory or disk resources.
It takes a little setting up but once it's working you rarely need to touch it except to set up new users.
For anyone wanting a totally free VPN solution I heartily recommend it.
The only thing I would add is that I believe it can be set up on a Windows server as well as Linux although I haven't tried that.
We run it as a VM on Ubuntu Server LTS, it requires little in the way of memory or disk resources.
It takes a little setting up but once it's working you rarely need to touch it except to set up new users.
For anyone wanting a totally free VPN solution I heartily recommend it.
The only thing I would add is that I believe it can be set up on a Windows server as well as Linux although I haven't tried that.
Starting with "To begin with, you need to copy some files from the OpenVPN docs directory (typically provided in /usr/share/doc/openvpn-[version]) to create certificates:"
This article assumes a level of familiarity with Linux that many readers here will not have - this being a Windows-centric site.
How about explaing it for absolute newbies to Linux?
This article assumes a level of familiarity with Linux that many readers here will not have - this being a Windows-centric site.
How about explaing it for absolute newbies to Linux?
You need to get familiar with Linux first. It's not actually that hard if you know a bit about how the command line works on Windows, or even better if you can use a Mac. Try downloading the client version of Ubuntu and have a play around.
Alternatively there is a detailed' how to' on the OpenVPN website: http://openvpn.net/index.php/open-source/documentation/howto.html
Finally, you could also start by downloading a VM appliance to get started: http://www.vmware.com/appliances/directory/cat/0?k=openvpn
Alternatively there is a detailed' how to' on the OpenVPN website: http://openvpn.net/index.php/open-source/documentation/howto.html
Finally, you could also start by downloading a VM appliance to get started: http://www.vmware.com/appliances/directory/cat/0?k=openvpn
Thanks for the article, Vincent!
We've been having trouble getting our linux users connected to our Cisco small business "all-in-one" FW, router, VPN. So I was tackling a project to stand up an OpenVPN server in our DMZ. Couple of quick noob questions:
1. I assume the OpenVPN server would not need two NIC's (ie. one on the DMZ, one on the Corp LAN), and that once a client establishes a tunnel, it routes via that tunnel to the Corp LAN (assuming FW rules between the DMZ port and Private port are established).
2. I plan this to be a single purpose, stand alone box running OpenVPN. Is there a thin, secure distro you'd recommend? (Yes, I know you work for RedHat :> )
We've been having trouble getting our linux users connected to our Cisco small business "all-in-one" FW, router, VPN. So I was tackling a project to stand up an OpenVPN server in our DMZ. Couple of quick noob questions:
1. I assume the OpenVPN server would not need two NIC's (ie. one on the DMZ, one on the Corp LAN), and that once a client establishes a tunnel, it routes via that tunnel to the Corp LAN (assuming FW rules between the DMZ port and Private port are established).
2. I plan this to be a single purpose, stand alone box running OpenVPN. Is there a thin, secure distro you'd recommend? (Yes, I know you work for RedHat :> )
I run in it the DMZ and just just static routes to route through to the LAN side. And I run it on the server edition of Ubuntu LTS but any distro of your choice will do, it shouldn't make any difference unless you're particularly into extra security.
While running sh clean-all it's throwing the error
you must define KEY_DIR
you must define KEY_DIR
open vpn are not working. i need help & how to start online vpn store/business live?
... for the highly useful post and the ensuing comments that proved just as well. Outdoor Garden Lights | Outdoor Lights | Portable Flood Lights
I found some additional information, howto setup OpenVPN server and clients here
http://www.septimius.net/linux-howto-setup-openvpn-server/
This seems to be a little bit more compleated.
http://www.septimius.net/linux-howto-setup-openvpn-server/
This seems to be a little bit more compleated.
- Keyboard Shortcuts:
- Prev
- Next
- Toggle
