Stop Error 0x0000007E

Blue Screen of Death stop error code
0x0000007E (0xC0000005, 0x8050F6AA, 0xF898EA50, 0xF898E74C)

Beginning dump of physical memory
Physical memory dump complete.

Auto restarts before I can access anything. Balloon states new hardware primary IDE found. Then shuts down and gives Blue Screen.

Windows XP emachine C2685 Award Bios

Any help would be appreciated!

Thanks,
Ann

Tags: windows, stop error please help

a.stray@...

7th Oct 2007

Answer the Question

Answers (3)

Preferences

0 Votes

+ -

Enter your BIOS & disable auto restart on system failure

Power down, switch on and immediately after the initial splash screen/POST screen tap whatever key accesses your BIOS.

Your computer screen should tell you the correct key in the bottom left hand corner on power-up.

Navigate to the BIOS option for 'Auto restart on system failure' and uncheck it.

Navigate to 'Save & Exit'.

The next time the BSOD occurs it will stop and you can read the details of your error.

OldER Mycroft

7th Oct 2007

Replies

Main page choices
Date
Time
Floppy
Primary Master
Primary Slave
Secondary Master
Secondary Slave

the rest is in grey,...next page

Advanced
Plug and Play OS
Reset Configuration Data
Onboard Video Memory
Local Bus IDE Adapter
Onboard Lan Boot Rom
Set Supervisor Password
Onboard Device Configuration
I/O device Configuration
Hardware Monitor

next page...

Power
After AC Power Failure

next page...
Boot
Boot-time Diagnostics Screen
Boot Device priority

next page...
Exit
Exit Saving Changes
Exit dicarding Changes
Load Setup Default
Discard Changes
Save Changes

I'm I missing something? Thanks for your help

Ann

a.stray@... 7th Oct 2007

Flag

The 0x0000007e error is without doubt one of the most painful Windows errors that your Windows program can get.The 0x0000007e error is a kind of 'blue screen' error, which typically restarts your machine randomly, and it will eventually offer you a message and also details on the famed blue ....

http://microsoft-support-squad.blogspot.in/2012/06/fixstop-0x0000007e-error-code.html

gksrivastava.india 11th Jun

Flagged

0 Votes

+ -

If problem presist .....

if your hdd is bad you will face this problem, if your ram is bad also, also if there is problem in mother board.,

But delete and re part your HDD and install fresh windows, if you have two slots of RAM i mean two RAMs, remove one of them and check, if same remove other then check.

thanks

internetspider@...

7th Oct 2007

Replies

Should I just reformat or change something in Ghost to re part HDD?

Thanks,
Ann

a.stray@... 7th Oct 2007

Flag

0 Votes

+ -

RE: Stop Error 0x0000007E

Here is a link that explains the problem.
http://support.microsoft.com/kb/330182

In your last post you mention reformatting and Ghost. Are you using an image on the emachine? If so was the image created on the emachine? If not that is the problem.

Jacky Howe

7th Oct 2007