After sleep, Vista does not recognize ANY external media?

By reach110 ·
I have a laptop running windows vista home premium 32 bit with sp2. I have the power mode set to sleep when I unplug the laptop and then close the lid, so I can resume whatever I'm working on. If the computer has been turned on and hasn't been put into sleep mode at all for that day, it will recognize all external media, no matter how many times I unplug and reconnect it. However, after waking from sleep mode it no longer recognizes anything new as far as external media (dvds, cds, mp3 players, external hdds, usb mice... NOTHING.)

If the media remained plugged in through the sleep/wake process, it will still be recognized and accessible. But if it was unplugged during that time or plugged in for the first time after sleep/wake, the computer does not even see that it is there. It's driving me INSANE.

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

what sleep mode is setup in the bios?

by markp24 In reply to After sleep, Vista does n ...

Hi you may want to change the sleep/hibernate modes in the bios in an the os. your may also want to check out this fix from Microsoft

Sometimes it may be best to disable these and let the OS handle it (via power options) but if your in the bios heres the different states for sleep/suspens/hybernate)


S0 Working: the normal working state of the computer, the operating system and applications are running. The CPU(s) execute instructions. Within this state, it is possible for CPU(s) and devices like hard drives, DVD drives, etc. to be repeatedly put into and come back from low-energy states. Laptops, for example, routinely power down all currently unused devices when running on battery; some desktops also do this to reduce noise.

S1 (POS) Standby: All processor caches are flushed, and the CPU(s) stop executing instructions. Power to the CPU(s) and RAM is maintained; RAM is refreshed; devices that do not indicate they must remain on may be powered down. Some newer machines do not support S1; older machines are more likely to support S1 than S3. This state can operate when a card or peripheral does not recognize S3. The most power-hungry of sleep-modes. POS means Power On Standby.

S2 Standby: System appears off. The CPU has no power; RAM is refreshed; the system is in a lower power mode than S1. It is not commonly implemented.

S3 (STR) Standby: In this state, the CPU has no power, the power supply is in a reduced power mode, main memory (RAM) is still powered, although it is almost the only component that is. Since the state of the operating system and all applications, open documents, etc. lies all in main memory, the user can resume work exactly where they left off the main memory content when the computer comes back from S3 is the same as when it was put into S3. S3 has two advantages over S4; the computer is faster to resume than to reboot, secondly if any running applications (opened documents, etc) have private information in them, this will not be written to the disk. However, disk caches may be flushed to prevent data corruption in case the system doesn't wake up e.g. due to power failure. STR means Save To RAM. In modern operating systems it's called as: Standby in versions of Windows through Windows XP and in some varieties of Linux, Sleep in Windows Vista and Mac OS X.

S4 Hibernate: In this state, all content of main memory is saved to non-volatile memory such as a hard drive, preserving the state of the operating system, all applications, open documents etc. That means that after coming back from S4, the user can resume work where it was left off in much the same way as with S3. The difference between S4 and S3, apart from the added time of moving the main memory content to disk and back, is that a power loss of a computer in S3 makes it lose all data in main memory, including all unsaved documents, while a computer in S4 is unaffected. A system that's in S4 can also be Mechanicaly Off (no power at all) and still keep its S4 save state information, so that it can resume the operating state after getting back power. This mode is also referred to as Save To Disk, Suspend to Disk, Hibernation in Windows, Safe Sleep in Mac OS X.

S5 Soft Off: The hardware is completely off, the operating system has shut down; nothing has been saved. Requires a complete reboot to return to the Working state.

Back to Storage Forum
2 total posts (Page 1 of 1)  

Hardware Forums