General discussion

Locked

Article error

By nacht ·
This article has an error:

"The 90 sets the outbound bandwidth limit on the port to 90 percent of the port speed. Since this is a 100-Mb port, this should limit the outbound traffic from the port to 10 Mb."

90% of 100 Mb is 90 Mb. If you want 10Mb, the line should read

srr-queue bandwidth limit 10

Strange that this article has been around for 5 years without correction... ?

This conversation is currently closed to new comments.

1 total post (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Back to Networks Forum
1 total post (Page 1 of 1)  

Hardware Forums