General discussion

Locked

Can't remove printer or print

By NLane126 ·
I can't remove and reinstall my printer its a HP Laserjet 4101 and its on the network. I keep getting and error when I try to print, it keeps tell me there is a network error and it can't find the network. There was an error writing to IP_192.168.1.100 and that the network could not be used for the operation requested. I have gone into file then properties it show IP_192.168.1.100 (HP Standard TCP/IP Port)and it shows it right place saying print to the following port, I have even changed the spool setting from raw to EMF and still nothing. What's my next option.

This conversation is currently closed to new comments.

4 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by pierrejamme In reply to Can't remove printer or p ...

What is the IP number of your computer?
IPConfig /all
If you aren't 192.168.1.xxx then you might have a routing problem

Collapse -

by gstratton In reply to Can't remove printer or p ...

Do you have a firewall blocking this printers IP unintentionally?

Collapse -

by mikex In reply to Can't remove printer or p ...

According to your posting you're trying to print on the wrong Printer IP address:

Go and check the Printer IP settings+subnet mask and set them to the proper printer IP address+subnet mask

Then go to your installed printer and capture the Proper IP port for the Printer

Collapse -

by NLane126 In reply to Can't remove printer or p ...

This question was closed by the author

Back to Windows Forum
4 total posts (Page 1 of 1)  

Related Discussions

Related Forums