Question

Locked

Cisco 800 series DDNS and configure router for dns request

By tazz20019 ·
I have a cisco 871w with advip os. I have dsl and configuring for ddns to a ssh server. Formerly used ddns client on xp with web server in small home network. Configured PAT with port forwarding. I static mapped host dyndns to site ip and at least now get some results but not success. Any suggestions?
01:45.432: HTTPDNS: Update called for xxxx.homeftp.net <=> 71.251.54.31
01:45.432: HTTPDNS: init
01:45.432: HTTPDNSUPD: Session ID = 0x5
01:45.432: HTTPDNSUPD: URL = 'http://name:password@members.dyndns.org/nic/update?system=dyndns&hostname=belt.homeftp.net&myip='
01:45.432: HTTPDNSUPD: Sending request
cisco871(config-if)#
02:05.432: HTTPDNSUPD: Call returned Connection time out for update xxxx.homeftp.net <=> 71.251.54.31
02:05.432: HTTPDNSUPD: Freeing response
02:05.432: DYNDNSUPD: Another update completed (outstanding=0, total=0)
02:05.432: HTTPDNSUPD: Clearing all session 5 info
#############################################################################
cisco871#show host
Default domain is nsrest01.verizon.net
Name/address lookup uses domain service
Name servers are 71.252.0.12, 71.242.0.12

Codes: UN - unknown, EX - expired, OK - OK, ?? - revalidate
temp - temporary, perm - permanent
NA - Not Applicable None - Not defined

Host Port Flags Age Type Address(es)
office.xxxx.com None (perm, OK) 8 IP 192.168.1.0
basement.xxxx.com None (perm, OK) 7 IP 192.168.2.0
members.dyndns.org None (perm, OK) 0 IP 63.218.192.33
xxxx.homeftp.net 443 (perm, OK) 0 IP 192.168.1.100

This conversation is currently closed to new comments.

4 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Solution

by tazz20019 In reply to Cisco 800 series DDNS and ...

Had to create acl for it on Dialer interface.

Collapse -

re: Cisco 800

by ipcbcory In reply to Cisco 800 series DDNS and ...

There is some good resource and background info on the Cisco 800 here, along with password recovery and IOS upgrade instructions for the Cisco 800 <a href="http://www.ciscobuy.com/cisco-routers/cisco-800">Cisco 800</a>

Collapse -

zombie alert...again

by PurpleSkys In reply to re: Cisco 800

another dead post eh

Back to Networks Forum
4 total posts (Page 1 of 1)  

Hardware Forums