id="info"

Question

Locked

Cisco ASA 5505 write memory

By markjohnpili ·
Hi ive been having problem in asa 5505 , I already set to default config the asa and reload, when I try to change some data and using "write memory" it confirm that it save , when I reload the asa it get back to the default configuration .

Cisco Adaptive Security Appliance Software Version 8.0(4)
hoping for a positive reply's...thanks..

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

fsck flash

by robo_dev In reply to Cisco ASA 5505 write memo ...

could be corrupted

Collapse -

fsck flash

by markjohnpili In reply to Cisco ASA 5505 write memo ...

Hi robo how can I check if the fsck flash are corrupted?sorry for this im new ate this asa..thanks

Collapse -

format {disk0: | disk1: | flash:}

by markjohnpili In reply to Cisco ASA 5505 write memo ...

Hi Robo

if I will used format command with out back up the data on it is it alright ?does it will reload the right data on it or i will load a new data? I already try fsck flash and its still the same after I reload the changes i made it return to the old configuration .thanks

Collapse -

factory default

by CkITout In reply to Cisco ASA 5505 write memo ...

Check the configuration register.

Not sure about the values for the ASA family but I forgot one time while upgrading a router; made all changes, saved, rebooted.
Went back to default.....
Did this a couple of times until I noticed the message in boot log.
silly silly......

Back to Hardware Forum
5 total posts (Page 1 of 1)  

Hardware Forums