Question

Locked

CISCO ASA 5510 NOT DISPLAYING FILES (DIR)

By shaqataq1 ·
Hello,

I Am Working With An ASA 5510, I Reset To Default And Then Upgraded The IOS From Asa708-K8.bin to Asa821-k8.bin Successfully (copy tftp disk0).

My Concern Is When I Issue The Dir Command for disk0 i cant see the file or any files for that matter

Below are extracts & the running configs. Kindly help.

ciscoasa# dir all

Directory of disk0:/

2 drwx 8192 05:56:01 Sep 03 2012 log
9 drwx 8192 05:56:09 Sep 03 2012 crypto_archive
56 drwx 8192 06:24:07 Sep 03 2012 coredumpinfo

260145152 bytes total (243343360 bytes free)
Directory of disk1:/

No files in directory

260153344 bytes total (260153344 bytes free)
Directory of system:/

1 ---- 0 00:00:00 Jan 01 1970 running-config

No space information available
ciscoasa# dir flash:

Directory of disk0:/

2 drwx 8192 05:56:01 Sep 03 2012 log
9 drwx 8192 05:56:09 Sep 03 2012 crypto_archive
56 drwx 8192 06:24:07 Sep 03 2012 coredumpinfo

260145152 bytes total (243343360 bytes free)
ciscoasa# sh flash
--#-- --length-- -----date/time------ path
2 8192 Sep 03 2012 05:56:01 log
9 8192 Sep 03 2012 05:56:09 crypto_archive
56 8192 Sep 03 2012 06:24:07 coredumpinfo
57 43 Sep 03 2012 07:22:36 coredumpinfo/coredump.cfg

260145152 bytes total (243343360 bytes free)
ciscoasa#

ciscoasa# sh flash
--#-- --length-- -----date/time------ path
2 8192 Sep 03 2012 05:56:01 log
9 8192 Sep 03 2012 05:56:09 crypto_archive
56 8192 Sep 03 2012 06:24:07 coredumpinfo
57 43 Sep 03 2012 07:22:36 coredumpinfo/coredump.cfg

260145152 bytes total (243343360 bytes free)
ciscoasa#


ciscoasa# sh run
: Saved
:
ASA Version 8.2(1)
!
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
dns-guard
!
interface Ethernet0/0
nameif INSIDE
security-level 100
ip address 1.1.1.1 255.255.255.252
!
interface Ethernet0/1
shutdown
no nameif
no security-level
no ip address
!
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
!
ftp mode passive
pager lines 24
logging asdm informational
mtu INSIDE 1500
mtu management 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-508.bin
asdm history enable
arp timeout 14400
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns migrated_dns_map_1
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:6f6e03d0465f46237036c0d8ee31f5ca
: end
ciscoasa#

Launching BootLoader...
Default configuration file contains 1 entry.

Searching / for images to boot.

Loading /disk0... Booting...
Platform ASA5510
Loading...

Cisco Adaptive Security Appliance Software Version 8.2(1)

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Even hashed, don't post your password on the Internet

by robo_dev In reply to CISCO ASA 5510 NOT DISPLA ...

also your NAT mappings , what ports are open, your external and internal IP address......

Did you try the 'Show file' command?

To clarify, your dir or disk0 shows three files above, so there ARE files there, but is the issue simply using the Show File cli command?

Back to Networks Forum
2 total posts (Page 1 of 1)  

Hardware Forums