Question

Locked

Configure QoS on a cisco 2651 router

By mike_parada ·
I am a noob to cisco IOS and I need help configuring QoS a cisco 2651 router and a cisco 3524 switch with Inline Power, so we can use some polycom 601 phones in our office.

Here is the sh ver of the router.

Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JS-M), Version 12.2(13), RELEASE SOFTWARE (fc1
)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 19-Nov-02 21:21 by pwade
Image text-base: 0x8000808C, data-base: 0x8144C34C

ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)

Jz_2651 uptime is 0 minutes
System returned to ROM by power-on
System image file is "flash:c2600-js-mz.122-13.bin"

cisco 2651 (MPC860P) processor (revision 0x200) with 78848K/52224K bytes of m
emory.
Processor board ID JAB04500C6X (3759016472)
M860 processor: part number 5, mask 1
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Primary Rate ISDN software, Version 1.1.
2 FastEthernet/IEEE 802.3 interface(s)
1 Channelized E1/PRI port(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Back to Hardware Forum
2 total posts (Page 1 of 1)  

Hardware Forums