General discussion

Locked

Help...I need to remove a static route?

By Packet Spoofer ·
Can anyone help me remove the following static route from my cisco 2500 (yeah I know its old)
D EX 65.199.44.0 [170/2195456] via 10.1.12.2, 2d06h, Serial1

This conversation is currently closed to new comments.

8 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by CG IT In reply to Help...I need to remove a ...

try getting configmaker 2.6 from Cisco. you can use it to change your interfaces and remove the static route from the route table without having to use the command line.

Collapse -

by Packet Spoofer In reply to

Thank you very much for your help CG....I just could not get it to load my configuration because the program would not accept it...We run protocals that it apparently does not support....
Thanks again...
Scott

Collapse -

by Packet Spoofer In reply to Help...I need to remove a ...

Point value changed by question poster.

Collapse -

by CG IT In reply to Help...I need to remove a ...

Here is the command line reference for IOS 11.0 and above for cisco 2500 series [2600, etc].

enable

#route delete <NETWORK_ADDRESS>

Collapse -

by Packet Spoofer In reply to

Cg...thanks for hanging with me on this issue...I have not been able to run the command you referenced for some reason on this router. I have pasted the results I receive below for you to see for yourself.
Any other input you have is welcome, and I am willing to try anything you suggest as far as removal commands to see if it works....
Thanks again
Scott


BattleCreek# sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default
U - per-user static route, o - ODR

Gateway of last resort is 192.168.112.1 to network 0.0.0.0

10.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
C 10.1.11.0/24 is directly connected, Serial0
D 10.1.14.0/30 [90/2195456] via 192.168.112.252, 15:33:51, Ethernet0
C 10.1.12.0/24 is directly connected, Serial1
12.0.0.0/27 is subnetted, 1 subnets
S 12.111.233.224 [1/0] via 10.1.12.2
D EX 19.0.0.0/8 [170/2172416] via 10.1.11.2, 15:31:54, Serial0
206.18.202.0/32 is subnetted, 1 subnets
D EX 206.18.202.19 [170/2172416] via 10.1.11.2, 15:31:54, Serial0
D EX 206.18.241.0/24 [170/2172416] via 10.1.11.2, 15:31:54, Serial0
133.189.0.0/24 is subnetted, 1 subnets
D EX 133.189.56.0 [170/2172416] via 10.1.11.2, 15:31:54, Serial0
65.0.0.0/24 is subnetted, 1 subnets
D EX 65.199.44.0 [170/2195456] via 10.1.12.2, 15:31:54, Serial1
D EX 192.28.163.0/24 [170/2172416] via 10.1.11.2, 15:31:54, Serial0
206.114.61.0/32 is subnetted, 1 subnets
S 206.114.61.205 [1/0] via 192.168.112.1
D EX 198.208.148.0/24 [170/2172416] via 10.1.11.2, 15:32:02, Serial0
129.9.0.0/16 is variably subnetted, 2 subnets, 2 masks
D EX 129.9.201.30/32 [170/2172416] via 10.1.11.2, 15:32:02, Serial0
D EX 129.9.236.0/23 [170/2172416] via 10.1.11.2, 15:32:02, Serial0
D EX 192.85.5.0/24 [170/2172416] via 10.1.11.2, 15:32:02, Serial0
164.56.0.0/24 is subnetted, 2 subnets
D EX 164.56.185.0 [170/2172416] via 10.1.11.2, 15:32:02, Serial0
D EX 164.56.169.0 [170/2172416] via 10.1.11.2, 15:32:02, Serial0
166.57.0.0/24 is subnetted, 1 subnets
D EX 166.57.16.0 [170/2172416] via 10.1.11.2, 15:32:02, Serial0
172.16.0.0/24 is subnetted, 3 subnets
D EX 172.16.12.0 [170/2172416] via 10.1.11.2, 15:32:02, Serial0
D EX 172.16.13.0 [170/2195456] via 10.1.12.2, 15:32:02, Serial1
C 172.16.11.0 is directly connected, Ethernet0
192.168.139.0/30 is subnetted, 2 subnets
D 192.168.139.0 [90/2681856] via 10.1.12.2, 15:32:04, Serial1
[90/2681856] via 10.1.11.2, 15:32:04, Serial0
D 192.168.139.4 [90/2681856] via 10.1.12.2, 15:32:02, Serial1
D EX 192.168.128.0/24 [170/2172416] via 10.1.11.2, 15:32:02, Serial0
S* 0.0.0.0/0 [2/0] via 192.168.112.1
S 192.168.120.0/22 [1/0] via 192.168.112.252
D EX 192.168.124.0/22 [170/2172416] via 10.1.11.2, 15:32:02, Serial0
C 192.168.112.0/22 is directly connected, Ethernet0
D EX 192.168.140.0/22 [170/2684416] via 10.1.12.2, 15:31:58, Serial1
D EX 192.168.132.0/22 [170/2195456] via 10.1.12.2, 15:32:02, Serial1
BattleCreek#conf t
Enter configuration commands, one per line. End with CNTL/Z.
BattleCreek(config)#route delete 65.199.44.0 255.255.255.0
^
% Invalid input detected at '^' marker.

BattleCreek(config)#route delete ?
% Ambiguous command: "route delete "
BattleCreek(config)#exit
BattleCreek#route delete ?
% Unrecognized command
BattleCreek#route delete

Collapse -

by M.R. In reply to Help...I need to remove a ...

I think you're close.
en
conf t
# to add a route-
ip route x.x.x.x x.x.x.x x.x.x.x(or interface #)
# to delete a route-
no ip route x.x.x.x x.x.x.x x.x.x.x(or int.#)
ctl Z
copy ru st

I may have missed it in my quick read but being a 2500 isn't as important as your IOS version when it comes to finding the right commands.

Collapse -

by Packet Spoofer In reply to

Thanks for your help MR.....This route was apparently defined on another router in our enterprise and populating the routing table of the router in question (from which I pasted the configuration in the post above....)
The syntax was not the problem apparently, but the target router....
Thank you for your answer....It is correct, only it needed to be done on another router....
Thx....

Collapse -

by Packet Spoofer In reply to Help...I need to remove a ...

This question was closed by the author

Back to Networks Forum
8 total posts (Page 1 of 1)  

Related Discussions

Related Forums