Question

Locked

how do I setup a remote access vpn

By emakwepa ·
I have some remote users who need access to the server for maintenance purpose, I am struggling to setup the connection. i am using ASA 5540. Please advice on what need to be done and how.

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Simple Fix

by robo_dev In reply to how do I setup a remote a ...

Goto the Cisco CLI and type:

crypto isakmp struggle disable

But seriously, is there any particular issue you are having, such as an error message, or some configuration option?

Collapse -

Real VNC

by aidemzo_adanac In reply to how do I setup a remote a ...

Been using it for about a decade or so for SOME remote log in needs. Simple, free (for the most part), works well, stable, does all I need it too.

www DOT realvnc DOT com

Piece of cake to set up and configure, literally a few minutes,

I started using it when I needed access to update a remote server once a week and didn't want full time server management from my desktop. Works like a hot damn!

Collapse -

Real VNC

by aidemzo_adanac In reply to how do I setup a remote a ...

Sorry for double post, it would let me save after editing.

Collapse -

For a business network

by cpguru21 In reply to how do I setup a remote a ...

There are many devices out there that can accommodate this need for you. The Realvnc option would involve some port forwarding in your firewall device. It looks like your device is capable of VPN configuration on its own.

check here: https://supportforums. cisco.com/thread/262595 (remove the space)

Is this configuration of your CISCO beyond your expertise? If so you may want to hire a professional. In our pfsense days, we would typically hand a VPN device (like a sonic wall VPN) off of the main pfsense router. Then your router is just passing VPN traffic to the specific VPN device.

Of course deffinately a VNC software solution would do the trick. I would recomend a configuration where you were only allowing VNC traffic from very specific IP's if possible, rather than leaving it up to a user and password alone.

Back to Networks Forum
5 total posts (Page 1 of 1)  

Hardware Forums