Question

Locked

How to install linux in sata drive

By srinut31 ·
hello friends,
i have sata hard disk, when i try to install the linux in that it's saying hard drive is not found .
i try this command " linux all-generic-ide noapic nolapic " it's working but probs is its showing kernel panic booting time
can any one help me how to write in grub file , how to edit it pls

This conversation is currently closed to new comments.

10 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

SATA

by hecrespo In reply to How to install linux in s ...

I had the same issue when I used Fedora 5, so i tried a different distro. Try Suse 10.2 you might have better luck.

Collapse -

i have redhat 4, suse 10.0 this os or not supported

by srinut31 In reply to SATA

hello friend ,
i try this coomand to install the linux os (linux all-generic-ide noapic). its working but after booting itsays kernel panic .
i go rescue mode i not find any hardisk there\

Collapse -

Same Problem HERE

by jacobhusain In reply to How to install linux in s ...

I did t he same thing that noapic etc It installed (RHEL4) but at boot time it shows some kernel panic .

I hope u have found out the solution by now
Please help me out.

Collapse -

i solve the problem

by srinut31 In reply to Same Problem HERE

hi ,
after complete the installation u get the kernel panic error . after booting the go to grub and edit the grub line called kernel in that line u find noapic . in front of the noapic word u wirte "all-generic-ide" say boot than its take time to boot 30min its take after get in to the os .after that open /boot/grub/grub.conf u find kernel line u write same thing .

Collapse -

Thanks Srinu

by jacobhusain In reply to i solve the problem

Thanks Srinu your prompt reply.
Actually i reinstalled. With that
"boot: linux-all-generic-ide apic nolapic"
But used disk druid to created just / and /swap and it installed well.
Its now running fine.


I'm doing RHCE course, Will seek ur help whenever required.

Thanks n Regards
Jacob

Collapse -

Good luck

by srinut31 In reply to Thanks Srinu

dear friend,

u have learn shell and pearl programing

Collapse -

how to install the sata hdd in linux

by karthi.govindarajan In reply to i solve the problem

i have used the sata hdd.but not install the linux in SATA hdd.not found in HDD

Collapse -

Installing In sata hdd

by pawanohpawan In reply to How to install linux in s ...

change your bios setting use legacy instead of native.it will solve your problem.

Collapse -

how to change bios setting from native to legacy

by mahmoodilyas In reply to Installing In sata hdd

hello all

i am trying to install linux red hat 9 on sata drives, but failed. i read solution that change bios setting from native to legacy, but how, while i am using sata drive with P IV (3.6 GHz processor). Please guide me in this context

Back to Hardware Forum
10 total posts (Page 1 of 1)  

Hardware Forums