Question

Locked

HP LJ 4515 Problem (extra tray)

By patb071 ·
I have a LJ 4515tn after i updated the printer to the newest firmware (04.090.3) the printer would reboot and get stuck at "Checking Paper Path" I removed the extra tray and restarted the printer and it works. So i installed firmware (04.080. same thing happens. The printer is out of warranty so no help from HP. Any one know the problem or have the driver version 04.049.3 so i can see if it starts to work again?

Edit: Now when printing it will freeze at "processing" it happens randomly. I need to turn it off and back on.

This conversation is currently closed to new comments.

7 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

See link

by robo_dev In reply to HP LJ 4515 Problem (extra ...

http://www.oasq.com/redirect.php?tid=252027&goto=lastpost

Collapse -

Thanks But

by patb071 In reply to See link

I seen a site with same questions and responses. I followed all there advice and it still does it.

Collapse -

Reponse To Answer

by mokeli In reply to See link

New URL???
http://www.oasq.com/P4015-stuck-in-checking-paper-path-thread-252027-1-1.html

Collapse -

Poke around HP FTP site

by robo_dev In reply to HP LJ 4515 Problem (extra ...

ftp://www.hp.com/pub/printers/software/

maybe the old version is there somewhere

Here is more direct link to the firmware files unziopped:

ftp://ftp.hp.com/pub/networking/software/pfirmware

Collapse -

Update

by patb071 In reply to HP LJ 4515 Problem (extra ...

Come to find out the extra tray is bad. i took the tray to a different printer and the same thing happened. Still can't find an older firmware but o well as long as the printer still works. Thanks

Collapse -

Sometimes the solution is easier than we think

by robo_dev In reply to Update
Back to Peripheral Forum
7 total posts (Page 1 of 1)  

Related Discussions

Related Forums