Question

Locked

HSRP configuration for multiple VLAN on Cisco 4506 switches

By spardeshi ·
Hi,

I've two Cisco 4506 switches; on which I've created around 10 VLANs.
now I have configured HSRP on both the switches. but it doesn't seem to be working as expected.

one thing I specifically want to know is do I need to configure a different standby group number for each VLAN interface ?
please go through the part of the configuration below give your expert views:

For switch A :

interface Vlan1
ip address 172.16.1.2 255.255.255.0
standby 1 ip 172.16.1.1
standby 1 timers 5 15
standby 1 priority 110
standby 1 preempt

interface Vlan10
ip address 172.16.10.2 255.255.255.0
standby 1 ip 172.16.10.1
standby 1 timers 5 15
standby 1 priority 110
standby 1 preempt
!
interface Vlan20
ip address 172.16.20.2 255.255.255.0
standby 1 ip 172.16.20.1
standby 1 timers 5 15
standby 1 priority 110
standby 1 preempt

For switch B:

interface Vlan1
ip address 172.16.1.3 255.255.255.0
standby 1 ip 172.16.1.1
standby 1 timers 5 15
standby 1 preempt
!
interface Vlan10
ip address 172.16.10.3 255.255.255.0
standby 1 ip 172.16.10.1
standby 1 timers 5 15
standby 1 preempt
!
interface Vlan20
ip address 172.16.20.3 255.255.255.0
standby 1 ip 172.16.20.1
standby 1 timers 5 15
standby 1 preempt

Regards,
spardeshi.

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

What part isn't working

by NetMan1958 In reply to HSRP configuration for mu ...

Can you give more information about what isn't working. Also post the output from:
"sh standby vlan 1"
repeat that for each vlan number and/or:
"sh standby all"

Collapse -

part that is not working

by spardeshi In reply to What part isn't working

Hi,
thanks for your reply,
actually I found that after configuring the HSRP; voice calls from the IP phones from one of the VLANs are going one way. i.e. we can hear the remote user but he can't hear us.
also after I manually disconnect the uplink to the router from switch A, the HSRP do not converge and Switch A remains as Active router and Switch B remains as standby.
I will post the required output by EOD.

Regards,
spardeshi

Back to Networks Forum
3 total posts (Page 1 of 1)  

Hardware Forums