Question

Locked

MS DHCP Server in a VLAN Environment

By arshij ·
I am segmenting my LAN in to 7-8VLANs, including VLAN 1 which hosts most of the servers and DHCP. I have tried to configure Cisco switches using "IP Helper-Address" & "IP DHCP Relay" commands but no success. Can someone share his experience with us to resolve this issue?

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Re:MS DHCP Server in a VLAN Environment

by sunu007 In reply to MS DHCP Server in a VLAN ...

1.use multiscpoe option in MS DHCP Server.
2.Create 7 or 8 scopes on the dhcp server with address pools like "192.168.1.0/24 ,192.168.2.0/24,....for each vlan.
3.create vlan interfaces on the router for each vlan, assign ip addresses and masks to the interfaces according to your DHCP scopes.
4.configre "ip healper address" on the router/L3 switch.
5. you are done.

Collapse -

yep

by CG IT In reply to Re:MS DHCP Server in a VL ...

sunu is right, gotta have a layer 3 device [router] to "route" traffic between vlans

Cisco's term for this is "router on a stick"

Back to Networks Forum
3 total posts (Page 1 of 1)  

Hardware Forums