Question

Locked

need help to configure cisco router 1800 to connect to the internet,

By Prithvi1069 ·
Hi all,
i need to connect router 1841 to the internet i have two fast ethernet ports . one to configure Lan ip and another for wan interface
details which was given to me is
wan ip: 182.73.22.130 Mask:255.255.255.252
gateway:182.73.22.129
Lan ip range 182.73.27.66 to 182.73.27.70 Mask :255.255.255.248
gateways: 182.73.27.65
Dns primary:205.56.230.5
secondary:202.56.230.6


Please Help me out by step by step configuration with command lines...


Thanks
With regards

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

try looking here

by gdeangelis In reply to need help to configure ci ...

Try looking at this link. Most of what you need is in there. I always find having to do a little work to get it going helps me remember it.
https://supportforums.cisco.com/thread/2118126
There is a lot more on cisco's site.
You will need to assign your addresses, configure routing, configure you access list and nat
configure your dns, possibly inside on your devices or internal dns for forwarding
Are you setting this up for home or work?
Please let me know if this helps

Back to Networks Forum
2 total posts (Page 1 of 1)  

Hardware Forums