General discussion

Locked

Netware Client32 Boot nDisk For Dos/Win

By enunga ·
I am trying to create a dos boot disk to connect my note books to the network, but it keeps hanging at file server not found. So can some one show me an example net.cfg, startnet.bat, config.sys, and autoexec.bat files configurations for this project.
Thanks.

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Netware Client32 Boot nDisk For Dos/Win

by DLe In reply to Netware Client32 Boot nDi ...

Here is a sample for 3Com 3C509 card.
autoexec.bat:
--------------
@CALL STARTNET.BAT
f:\login

STARTNET.BAT:
-------------
A:\NWCLIENT\LSL.COM
A:\NWCLIENT\3C90X.COM
A:\NWCLIENT\IPXODI.COM
A:\NWCLIENT\VLM.EXE

NET.CFG:
--------
Link driver 3C90X
Frame Ethernet_802.2
Link Support
Max Stacks 8
NETWARE DOS REQUESTER
; PREFERRED SERVER =
FIRST NETWORK DRIVE = F
USE DEFAULTS = OFF
LARGE INTERNET PACKETS = ON
PB BUFFERS = 10
VLM = CONN.VLM
VLM = IPXNCP.VLM
VLM = TRAN.VLM
VLM = SECURITY.VLM
VLM = NDS.VLM
VLM = BIND.VLM
VLM = NWP.VLM
VLM = FIO.VLM
VLM = GENERAL.VLM
VLM = REDIR.VLM
VLM = PRINT.VLM
VLM = NETX.VLM

Check your NIC'sdriver disk under ODI, or NetWare, or NWClient for the needed files and sample Net.cfg file as well.

Collapse -

Netware Client32 Boot nDisk For Dos/Win

by enunga In reply to Netware Client32 Boot nDi ...

The question was auto-closed by TechRepublic

Collapse -

Netware Client32 Boot nDisk For Dos/Win

by cyberjua In reply to Netware Client32 Boot nDi ...

How about lastdrive=z in config.sys too

Collapse -

Netware Client32 Boot nDisk For Dos/Win

by enunga In reply to Netware Client32 Boot nDi ...

The question was auto-closed by TechRepublic

Collapse -

Netware Client32 Boot nDisk For Dos/Win

by enunga In reply to Netware Client32 Boot nDi ...

This question was auto closed due to inactivity

Back to Networks Forum
5 total posts (Page 1 of 1)  

Hardware Forums