Question

Locked

New local printer on computerviewable but unaccessable by network users

By richardsond ·
I replaced 1 pc and 1 printer on our network. The pc, like the original, is connected to the network via wireless. The local PC can print no problem, but any other PC is unable to print to that printer, even though it shows up in the "add printer" options for network printers. I tried every combination of new and old printer and computer to no avail. When you go to add it, it says that the printer is unavailable or the name was possibly misspelled. Have tried new cables, wireless cards, OS upgrades, drivers thus far. Any suggestions?

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Shared

by Wizard-09 In reply to New local printer on com ...

Silly question but do you have the printer shared out, is it a network printer with IP address how is the printer setup?

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome.

Collapse -

couple things

by shasca In reply to New local printer on com ...

How is the printer connected? USB? USB Hub?Anything show up in Device manager showing hardware issues?

Could you connect it to the other PC and see if it will communicate shared out from there?

You would then know if it is the PC or the printer.

Collapse -

Even an identical unit is foreign in the eyes of the Network...

by OldER Mycroft In reply to New local printer on com ...

So the entire network HAS to be configured again from scratch for BOTH the new computer and the new printer.

Just as it was done originally.

Collapse -

The only time I have seen printers behave like that

by OH Smeg In reply to New local printer on com ...

Is when they are not able to be networked. So what is the Make & Model of this printer?

Col

Back to Software Forum
5 total posts (Page 1 of 1)  

Software Forums