General discussion

Locked

NT Server Kbd and mouse not working

By jim_lucas71 ·
We have a NT server on a Dell power edge server. A user who is responsible for this server was working with their tech support and disabled a NIC and set it up to only use the second NIC of two intentionally.But after re-booting when the os is loaded there is no mouse pointer and no kbd response. The kbd does work in text mode, there is no ERD and the last known good did not fix the problem. What can I do to get the kbd and mouse to work again in the NT os?

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

NT Server Kbd and mouse not working

by Lintadsl In reply to NT Server Kbd and mouse n ...

Sounds like COM ports or IRQ conflict. Since you don't have any control (no PCAnywhere installed?)
I would take NICs out of server and re plug both kbd and mouse. I hope this helps.

Good Luck,

Collapse -

NT Server Kbd and mouse not working

by jim_lucas71 In reply to NT Server Kbd and mouse n ...

Poster rated this answer

Collapse -

NT Server Kbd and mouse not working

by jim_lucas71 In reply to NT Server Kbd and mouse n ...

This question was closed by the author

Back to Windows Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums