Question

Locked

NTFS hard disk now recognized as 'RAW'

By darksound_ ·
My Windows XP was recently corrupted and my hard disk was password protected. In an effort to retrieve my old info I slaved my hard disk to a friends PC. I changed the permissions on my old, slaved drive and all was well. I then installed a secondary 250 GB slave so I could backup the data on his 'D:' (primary slave) drive, which he promised to me after I was done. Then, when I uninstalled my old drive, his primary slave was no longer present in 'My Computer'. I removed the new 250 GB drive, but his primary slave was still not visible. I did a little research and found that I could reassign the drive letter to make it visible via the disk manager and reassigned the 'D:' designation. The drive is now visible, but it says that the disk is unformatted, which is obviously not true. How can I rectify this without formatting the drive?

This conversation is currently closed to new comments.

6 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Try running the Check Disk with the Repair Option

by OH Smeg In reply to NTFS hard disk now recogn ...

You will find the directions for this in the Help Files in the OS on the Computer affected by this problem.

Though it generally requires opening the Command Line Interface and typing in the CHKDSK/r on the affected HDD. The exact string will be in the help files and generally speaking you need to reboot and the repair is run on the restart.

This often accrues because the Master Boot Records are no longer identical and the computer interprets this as a unformatted HDD.

Col

Collapse -

CHKDSK/r asks for a format... tried testdisk it worked :)

by yann16 In reply to Try running the Check Dis ...

CHKDSK/r asks for a disk format (under vista or either Windows 7)...I tried testdisk and it fixed My FAT32 boot sector, and fat table (using advanced menu).
Technically, one has to use a disk or partition utility that can either diagnose and repair the boot sector (there is always a Backup copy stored). Try for instance acronis tools, getdataBack, easy Recovery, or more simply the free GNU testdisk). or if abyone still uses windows 95 or 98, do a good old fdisk /mbr

Collapse -

ZOMBIE ALERT !!!! ...

by OldER Mycroft In reply to CHKDSK/r asks for a forma ...

Well over 2 years into the advanced stages of decay.

Collapse -

Easy to solve raw drive and access it again

by Saraline In reply to NTFS hard disk now recogn ...

A corrupt or missing boot sector will cause such kind of problem.

To fix the boot sector, you may refer to http://www.ptdd.com/partition-table-doctor/help/fixboot.htm

If it still cannot be solved, you have to recover all the data out and then format the partition as the system indicates so that you can enter the partition again.

http://www.easeus.com/resource/memory-card-format-recovery.h?tm

Collapse -

Recover your data at first.

by userlilidajiu In reply to NTFS hard disk now recogn ...

Whether you can find a way to fix your boot sector, you are supposed to recover your data there in case of data loss, and then format it so that you can use your raw drive again.
This can lead you to find an appropriate utility:
Tested Data Recovery Freeware
http://www.squidoo.com/tested-data-recovery-freeware-recommendations-for-you

Back to Hardware Forum
6 total posts (Page 1 of 1)  

Hardware Forums