Question

Locked

pix firewall

By luhar.leo ·
i have not ping inside interface ,plz tell me what's problem are there ?

PIX Version 4.4(1)
nameif ethernet0 external security0
nameif ethernet1 inside security100
nameif ethernet2 pix/intf2 security10
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pixfirewall
fixup protocol sqlnet 1521
no fixup protocol h323 1720
no fixup protocol rsh 514
no fixup protocol smtp 25
no fixup protocol ftp 21
no fixup protocol http 80
names
pager lines 24
logging timestamp
no logging console
no logging monitor
logging buffered informational
logging trap informational
logging facility 20
interface ethernet0 100full
interface ethernet1 100full
interface ethernet2 auto
mtu external 1500
mtu inside 1500
mtu pix/intf2 1500
ip address external 192.168.75.42 255.255.255.252
ip address inside 192.168.75.9 255.255.255.252
ip address pix/intf2 127.0.0.1 255.255.255.255
no failover
failover timeout 0:00:00
failover ip address external 0.0.0.0
failover ip address inside 0.0.0.0
failover ip address pix/intf2 0.0.0.0
arp timeout 14400
nat (inside) 0 192.168.75.10 255.255.255.252 0 0
conduit permit icmp any any
conduit permit tcp host 192.168.75.9 eq www host 192.168.75.41
conduit permit tcp host 192.168.75.41 eq www host 192.168.75.9
conduit permit tcp host 192.168.75.9 eq www any
conduit permit tcp any any
conduit permit udp any any
no rip external passive
no rip external default
no rip inside passive
no rip inside default
no rip pix/intf2 passive
no rip pix/intf2 default
route external 0.0.0.0 0.0.0.0 192.168.75.41 1
route inside 0.0.0.0 0.0.0.0 192.168.75.10 1
timeout xlate 3:00:00 conn 1:00:00 half-closed 0:10:00 udp 0:02:00
timeout rpc 0:10:00 h323 0:05:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
telnet timeout 5
terminal width 80
Cryptochecksum:864a0d19d058297890935b94e30e0fff
: end
[OK]

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Back to Networks Forum
2 total posts (Page 1 of 1)  

Hardware Forums