Question

Locked

PortForwarding and PAT for same internal machine

By rafi.mohammed ·
Hi,

i have problem in publishing my internal server for both NAT and PAT.

Details:
1) I can able to publish my VoIP server (192.168.10.10) on port 5060 using public ip (10.10.12.12) address on my cisco asa 5510 router. so , all incoming traffic with with destination 10.10.12.12:5060 will directly hit my internal voip server on 192.168.12.10:5060 port.

2) now i have requirement to add PAT to above setup. but, both PortForwarding and PAT should work for me.

ex: internetuser:10000---PAT---192.168.12.10:5060

can any one help me in resolving above.

Thanks

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

See Guide

by robo_dev In reply to PortForwarding and PAT fo ...

Static PAT should work fine.

Static PAT translations allow a specific UDP or TCP port on a global address to be translated to a specific port on a local address. That is, both the address and the port numbers are translated.

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/nat_staticpat.html
l

Back to Networks Forum
2 total posts (Page 1 of 1)  

Related Discussions

Related Forums