General discussion

Locked

Print to a site with dynamic IP - cont.

By Raymond Wong ·
The central site has a domain with fixed IPs, the internet connecting router is Novell's NIAS 4.1 on NetWare 5 SP2 using an leased-line analogue modem connected to the com port. NAT is enabled providing static mapping only. The remote site is also using NIAS4.1 on NetWare 5 SP2 with an dial-up analogue modem. Here NAT provides dynamic mapping only.
I can login to the NDS from a workstation at the remote site using DOS login utility as Novell doesn't support GUI login through NAT. But I can't get any IPX services to work.
What do I need to do ?

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Print to a site with dynamic IP - cont.

by rmacbeth In reply to Print to a site with dyna ...

See TID 10012088 and make sure you are using the latest client32 (ver 3.2 or at least 3.1 with sp2 applied) Rich

Collapse -

Print to a site with dynamic IP - cont.

by Raymond Wong In reply to Print to a site with dyna ...

The question was auto-closed by TechRepublic

Collapse -

Print to a site with dynamic IP - cont.

by TechAdmin In reply to Print to a site with dyna ...
Collapse -

Print to a site with dynamic IP - cont.

by Raymond Wong In reply to Print to a site with dyna ...

The question was auto-closed by TechRepublic

Collapse -

Print to a site with dynamic IP - cont.

by Raymond Wong In reply to Print to a site with dyna ...

This question was auto closed due to inactivity

Back to Networks Forum
5 total posts (Page 1 of 1)  

Hardware Forums