Question

Locked

Printers not showing on network ping

By banx ·
I was asked to supply a couple of free ip addresses for new pc's on our network. I used look@lan and discovered what i thought were 2 free ip addresses. Turns out they were allocated to network printers. How do i find free ip addresses on my network? as pinging printers returns a packet lost and so i assumed the address was not in use.
Any and all help welcomed.

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

are you running DHCP

by tburns In reply to Printers not showing on n ...

You should be able to look at what your DHCP settings and see which ip's have already been allocated and which ip's have not been.

Collapse -

Static IP's throughout

by banx In reply to are you running DHCP

No dhcp thankfully. Everything has a static address and when looking at a range, say 10.125.40.0 - 10.125.40.10 if a printer has an ip of 10.125.40.5 it doesn't show up as being in use and could therefore be used for a new pc. This is the problem i am having in identifying static ip's in use that don't respond to a ping request.

Collapse -

Is the router is MAC Based or Port Based

by vinitogupta In reply to Printers not showing on n ...

Is the router mac based because if so it will say the ip in use because of cloned mac so check that out

Collapse -

Nope Port based

by banx In reply to Is the router is MAC Base ...

Ping commands work fine. I can ping any number of printers, but if i want to find say 10 free ip addresses in a range then I'd have to ping all numbers in the range to see if i got a response and if not would then know that address was free. This is time consuming. By using Look@Lan i can easily see what ip addresses are not being used - the problem being printers do not show.
Thanx 4 the help provided thus far....

Back to Networks Forum
5 total posts (Page 1 of 1)  

Hardware Forums