General discussion

Locked

Procurve 2600

By rpatel ·
I need help programming the switch to work with mitel 3300 voice,data and a access point.

management vlan is the default vlan.
guest vlan is vlan 20.
VOIP vlan is 30.
wireless is 40.

Access point ip is 10.10.0.68.
switch is 10.10.0.14


hostname "SW4"
ip default-gateway 10.10.0.1
ip timep dhcp
qos dscp-map 101110 priority 6 name "dscp 46 to Cos 6"
snmp-server community "public" Unrestricted
vlan 1
name "Management"
untagged 49-52
ip address 10.10.0.14 255.255.255.0
no untagged 1-48
exit
vlan 20
name "Client"
untagged 1-48
tagged 49-50
exit
vlan 30
name "VOIP"
qos dscp 101110
tagged 1-50
voice
exit
vlan 40
name "Wireless"
no ip address
exit
spanning-tree

This conversation is currently closed to new comments.

1 total post (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Post in the Questions Forum

by Oz_Media In reply to Procurve 2600

When you are at the main forum page, where you clicked 'Start a Discussion', click the 'Ask a Question' button instead, it will post to a different set of forums where people are happy to help you work through your issue.

Back to Networks Forum
1 total post (Page 1 of 1)  

Hardware Forums