Question

Locked

Recover Data

By sandeep_200797 ·
Can i recover Data From a Hardisk in which i installed 3-4 times Windows.
if yes than how much i recovered.?
i knows it's not 100% recovered !!
and which software is best in data recovery??

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

You can definitly try

by markp24 In reply to Recover Data

If you cant do it with the Software avaiable (R studio, Recurva, ontrack software) you can try data recover services (if its that important to you.), like Kroll Ontrack, http://www.krollontrack.com/data-recovery/

Collapse -

Easy answer is most likely no you can not

by OH Smeg In reply to Recover Data

What is required after use is what is called a Forensic Recovery where the HDD is dismantled the Platters Removed and the data read directly off the platters. This is not something that is done with a software application.

You can however try some Forensic Data Recovery programs if the data isn't Important to recover. However if the data is IMPORTANT you should stop using the drive IMMEDIATELY and pack it up and send it to a Forensic Recovery Specialist.

If it would just be Nice to recover some of the data you cat try one of these programs. This is a short list however there are others available but you really should look for Forensic Recovery Type Applications and Never write anything to the HDD during the process. Save any recovered Data to another Drive and under no circumstances write anything to this drive.

http://tinyurl.com/273ay5

http://tinyurl.com/rmvrv

http://tinyurl.com/yvrsl

http://tinyurl.com/yyk8cm

http://tinyurl.com/382vm

http://tinyurl.com/ynwnel

http://tinyurl.com/nc4kx

http://tinyurl.com/2wox7l

http://tinyurl.com/374d8b

http://tinyurl.com/djw6u

http://tinyurl.com/f73se

http://tinyurl.com/8bd3f

http://tinyurl.com/afu2j

While the last 2 are from the same company they are very different products. Win Hex should only be considered foe use by someone who knows Hex Inside Out while Davory is a great cheap General Purpose Application.

Personally I prefer the On Track Option but it's anything but cheap. However because I use this type of software a lot it's paid for itself many times over by now, for a cheaper option Spin Rite from Gibson Research or Stella have both very good reputations by other TR members.

This one has also been recommended by some people here on TR but I have no personal experience with it or how well it may or may not work

http://www.piriform.com/recuva/download

Col

Back to Software Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums