General discussion

Locked

Serial interface numerical keypad [DATACOMP]

By Devinefv ·
I have a numerical keypad. I opened the enclosure box [3.5x5"] and the chip inside say's DATACOMP KP517CA. on the rear of the PC board it say's "KPS17C", NO. 1611017089. It has a coord with a serial plug on it.
I need to use it like a regular numerical keypad running off of a windows based pc, and I need the driver . Any help is apreciated!
Thanks!

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by sgt_shultz In reply to Serial interface numerica ...

well here is their website as you probably already know i couldn't find any drivers there. email them?
http://www.datacomp.com.tw/index.htm

Collapse -

by TheChas In reply to Serial interface numerica ...

The internal parts and the actual model number will not be the same.

I did find a number of drivers on DataComp's web site.

http://www.datacomp.com.tw/support.htm

Looking at the product page, some devices do have serial port connections.

I assume that the original product label is missing?
If not, what does it say?
I would try and find the company that distributed the keyboard and see if they have a driver.
Often companies like DataComp are "OEM" suppliers. They make a general purpose product and customize it as required by a distributor.

Chas

Back to Desktop Forum
2 total posts (Page 1 of 1)  

Related Discussions

Related Forums