Question

Locked

Site-toSite VPN

By owen ·
I have an ASA5510 with VPN enabled but only for the VPN clients for all my staff here. Now we have aquired another company in Singapore and I have purchased an 837 as well as a pix 506E. I need to setup the VPN between these 2 sites, the contracting company has just advised me they know nothing about the command line in Cisco. I am a little knowledged in cisco but not for VPN and would like some advice on how to get this done..

Thanks

This conversation is currently closed to new comments.

7 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Call cisco

by jdclyde In reply to Site-toSite VPN

The support is good ( you DID buy the smartnet support, didn't you? )

They can help you configure these, and will even console in (if you let them) at the other end, instead of having novices there trying to do the config.

Another option is to do the config, capture the config to a txt file, and email it to them, and have them drop it in place.

Good luck with that.

Collapse -

call Cisco

by owen In reply to Call cisco

I would like to call Cisco, but unfortunately we have no direct contact with Cisco from the middle east, it is all tied up with vendors and the support is slow and crappy, not even they know what they are doing here in Dubai.. So i'm sort of stuck...

Collapse -

Try email support?

by jdclyde In reply to call Cisco

Sorry, but I haven't personally done VPN with the equipment your using, so that was my best shot.

Good luck.

Collapse -

There is no reason you cannot have Cisco Support...

by secure In reply to call Cisco

Why not purchase a Cisco Softnet contract?

Its around 50 US for the 837 but will give you 24 x 7 access to the Cisco TAC Engineers, and extended access to Cisco.com for knowledge base and IOS downloads...

Here's one we sell:

http://www.ciscohardwaremaintenance.com/catalog/SMARTnet-SoftwareUpdates-CON-SW-category-1-p-151641.html?currency=USD

Jon

Collapse -

VPN

by Jellimonsta In reply to Site-toSite VPN
Collapse -

Cisco

by aslam In reply to Site-toSite VPN

you can create vpn tunneling for both firewalls, but i never tried tunneling thru Firewalls. did your gateway is cisco? if so, you can make simple tunneling between routers and it will be easy to deploy.

Back to Networks Forum
7 total posts (Page 1 of 1)  

Hardware Forums