General discussion

Locked

SNMPUTIL Error: errorStatus=2...

By bes7252 ·
I installed SNMP Performance Counters on NT4 server as described at: http://support.microsoft.com/support/kb/articles/q139/4/88.asp.

The counters work fine until we start our Kodak-Eastman Imaging admin software. After the software is running I use the test included in the link above (SNMPUTIL get <agent> public
.iso.org.dod.internet.private.enterprises.microsoft.software.1.3.1.1.1.1.0) and get the error:
SNMPUTIL Error: errorStatus=2, errorIndex=1

Has anyone encountered this error before? Know what it means?

Thanks.
Brian

This conversation is currently closed to new comments.

4 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

SNMPUTIL Error: errorStatus=2...

by pcwebnet In reply to SNMPUTIL Error: errorStat ...

I have not experienced this problem, but I have found an illustration of how the errors
are indexed at the following web site in
RFC 2273 at http://www.faqs.org/rfcs/rfc2273.html
If you read through it very carefully,
then you might gain an understanding as to
the steps used to determine where the error
is occuring and how it is indexed. I would also encourage you to contact the maker of the software and ask them if they have heard of any such issues with other users using the utility that you are using. Use the Control-F key in your web browser and type in the word "error". Press find twice and
you will see a description for Command Generator Applications. Hope this helps

Collapse -

SNMPUTIL Error: errorStatus=2...

by bes7252 In reply to SNMPUTIL Error: errorStat ...

Poster rated this answer

Collapse -

SNMPUTIL Error: errorStatus=2...

by bes7252 In reply to SNMPUTIL Error: errorStat ...

Poster rated this answer

Collapse -

SNMPUTIL Error: errorStatus=2...

by bes7252 In reply to SNMPUTIL Error: errorStat ...

This question was closed by the author

Back to Windows Forum
4 total posts (Page 1 of 1)  

Operating Systems Forums