Question

Locked

Vlan passthrough on TimeWarner Versipak

By iceman433 ·
Can anyone tell me how to get my internal Vlans to pass through from my main location to a remote site using a Versipak outburst box? I have a Cisco 2811 router that has multiple Vlans configured and is handling DHCP. A cable runs from the 2811 to a Cisco 3560 switch and VTP is enabled allowing the Vlans to pass through to the switches. On the 3560 I have a port configured as a trunk port using dot1q encapsulation and the TimeWarner Versipak outburst box connected to that trunk port. When I go out to one of our remote locations that has a Versipak outburst box and try connecting a cisco 2950 switch with the vlans and trunk port configured I cannot get the vlans from the corporate office to communicate with the remote sites' vlans. I cannot ping the remote switch from the corporate office even though it worked plugged into the trunk port at the corporate office. Please help!!

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Back to Networks Forum
2 total posts (Page 1 of 1)  

Hardware Forums