Question

Locked

What can be the problem

By mkdpeter ·
I have DELL PRECISION 670.
When I start it I have the following reaction (after the POST process):

1) 2 beeps code
2) free of led are green (A, B and C)
3) D is yellow

NB: Nothing to the monitor screen

What can be the problem and eventuelly its cause or source

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Sounds like the memory...

1). Locate your memory chip(s) and take them out.
2). Boot your computer (you will hear some more beeps, do not worry). Shut down again.
3). Replace your memory chip(s).
4). Make sure you are GROUNDED at ALL TIMES while doing this by touching your metal casing of your computer.

Please post back if you have any more problems or questions.
If this information is useful, please mark as helpful. Thanks.

Collapse -

From Dell

by rahouseholder In reply to What can be the problem

# Ensure that the cables are properly connected to the system board from the hard drive, CD drive, and DVD drive.
# If the problem persists, contact Dell.

http://support.dell.com/support/edocs/systems/ws670/en/ug_en/advtrbl.htm#wp1058075

Back to Laptops Forum
3 total posts (Page 1 of 1)  

Hardware Forums