Question

Locked

What else can be causing an XP Pro system to be slow?

By luv2bike2 ·
XP PRO, SP 3, MS Updates all installed. 1.96 Gb of RAM. 3.20Ghz

It takes the system forever to boot up, the user finally logs in and it take forever before she can open up a program, (no matter what program it is: IE 8, AutoCAD, Explorer, MSCONFIG etc)
What I have done:
1) Installed and ran the following Scans:
Malwarebytes, Glary Utilites, Spybot Search and Destroy, Ad-Aware. some Malware, Spyware and Adware were found and removed.

2) Ran Trend Micro Anti Virus program and not viruses were found.

3) Ran SCANDISK, it took several hours (step 4 of 5 took over 6 1/2 hours to complete, it was still running when I left the office and I don't know how long step 5 took) and when I returned the next day the logon screen was up.

4) Defrag the hard drive - 2 times - both times it took forever.

5) went into MSCONFIG and unchecked all the startup programs and booted the system and still it is taking the system forever to boot up and login and do anything on the system.

6) Hard drive has over 95 GB of free space so space is not an issue

7) deleted the Temporary Internet Files.

checked Device Manager for conflicts and there are none.

What else can I do to check this system out before I format and install everything back on to the system. Any suggestions would be greatly appreciated!

Thanks in Advance!

Robin

PS. I updated all of the scan software in normal mode than ran the scans in SAFEMODE.
P.S.S I just went into Event Logs and tried to pull up the System Event log and it came back saying "The event log file is corrupt". hmmmm

This conversation is currently closed to new comments.

14 total posts (Page 1 of 2)   01 | 02   Next
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Test the HDD with it's makers Utility

by OH Smeg In reply to What else can be causing ...

Not sure which HDD you have here but you need to test it with it's Makers Testing Utility to confirm correct operation. You can get the correct Utility from here but you will need to know who made the HDD

http://www.tacktech.com/display.cfm?ttid=287

Then if the HDD is OK run chkdsk /r and see if that achieves anything.

Finally Defrag, Defrag, Defrag and Defrag yet again

Just running Defrag once isn't enough with a heavily fragmented HDD and the Defrag Utility that comes with Windows isn't good enough either try one of the third party Defragers like

Ultra Defrag

http://sourceforge.net/projects/ultradefrag/files/

Smart Defrag

http://download.cnet.com/Smart-Defrag/3000-2094_4-10759533.html

Auslogic Defrag

http://download.cnet.com/Auslogics-Disk-Defrag/3000-2094_4-10567503.html

and run them several times. With very badly fragmented HDD I've had to in the past run these utilities up to 12 times then switch to another when the first has done as much as it can.

After you have run several instances of a Defrag Utility it sort of stops doing any more so you need to try another which works slightly differently and then when that has done as much as it can return to the first and see if that makes any more difference.

Col

Collapse -

And clear the event logs.

by seanferd In reply to What else can be causing ...

Corrupt or overly large logs could be an issue.

Also, take a look at your system properties. Is the amount of RAM shown the amount you expect?

Collapse -

Will try your suggestions.

by luv2bike2 In reply to What else can be causing ...

I will post back (hopefully) today (Tuesday).
Thanks for your suggestions. :)

Collapse -

Remote possibility

by IC-IT In reply to What else can be causing ...

It could be the controller on the drive itself.
I just finished working on one that took 10 hours to scan 32000 files with Malwarebytes. 14 hours for a chkdsk /r.
Imaged the drive and watched the drive to drive copy go from UDMA 5 through the steppings to a PIO rate.
After the image, the new drive (copy of original) flew.

Collapse -

still running the SeaTools

by luv2bike2 In reply to What else can be causing ...

the Long Generic test has been going on for over 18 hours but it is still going--1% at a time.

Collapse -

Request for Clarification

by OH Smeg In reply to still running the SeaTool ...

Now for the good news

If the test shows a Fail you should pull the HDD out of the Computer and fit to another and retest. If it still fails it's the HDD at fault but if it passes the second test it's the M'Board, Power Supply or Data Lead at fault.

However saying that 18 hours is way too long for a Seatools DOS Test, I've never had one run more than an hour at longest on a fully functioning drive.

Of course with failing drives this is possible.

Col

Collapse -

Registry Errors / GPO's

by dduely In reply to What else can be causing ...

On our network here at work, pcs that take forever to login are usually having a networking issue ie: Group Policies are having trouble installing or removing software (Check your event viewer). Which leads me to my next tidbit of advice, Cleaning the registry with a decent cleaner. I suggest ccleaner it's a free download, and does a good job, and after running it on 100's of machines not 1 time have I had to restore the registry. (Still make a backup of the registry - good practice) Or it could just be a crap hard drive :-]

Collapse -

answer

by bjorn.dohmen In reply to What else can be causing ...

as mentioned before, "CCleaner", does the job with cleaning the registry.
- When jou installed CCleaner, go to the tab "Cleaner".
- Check every option under "System" except the last 3
- Check every option under "Advanced" except the 2nd and the last one.
- Go for the button Analyze, and after that run cleaner.

go to the tab "registry" and scan for issues.

after all this.
Run an drefrag tool like mentioned above.
reboot your computer

When this doesn't work i always test the memory.

suc6

Collapse -

Similar issue

by hunteba In reply to What else can be causing ...

I had a similar issue before. I thought it was the network so I changed the cable, had a network sniffer (diagnostic tool) to see if it detected any issues, and nothing was wrong, yet the computer was still slow. Then it hit me. There was an external usb device attached to the computer that slowed it down. Once I unplugged it from the pc, it ran speedily. Try disconnecting any usb devices and see if this resolves the problem.

Collapse -

Computer had died. LOL

by luv2bike2 In reply to What else can be causing ...

I ran the SeaTools from Seagate and passed all the tests. Ran the Dell Diagnostics program and it hung up on me, i had to unplugged the system and when i tried to turn it on it would not. Dell is sending out a technican to replace the motherboard, memory and power supply and possibly the hard drive. will see how the system runs after all is replaced.
Thanks for your suggestions. I will post back with the outcome.

Back to Browser Forum
14 total posts (Page 1 of 2)   01 | 02   Next

Software Forums