General discussion

Locked

Windows 98 and Celeron compatibility pro

By marrigoni ·
I have two pc mountinc Celeron 450Mhz Processor mounting Win 98 1st
edition and Win 98 2nd edition. The NIC driver is a 3Com 3C920 (3C905B
Compatible) and both are connected to a Sun Server mounting Solaris Ver.
2.5.1.

Coping a file from a folder on server to the C: of both pc cause no problem.
Coping a file from a folder on server to another on the same causing an error
message.

For the pc mounting Win 98 1st edition the error is:
An exception error 0D has occourred at 0028:C002BCCF in VxD
NTKern(01)+0000A58F. This was called from 0028:C00E1B14 in VxD
VKD(01)+000001D0.

For the pc mounting Win 98 2nd edition the error is
An exception error 0D has occourred at 0028:FF15E73 in VxD

This conversation is currently closed to new comments.

13 total posts (Page 1 of 2)   01 | 02   Next
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Windows 98 and Celeron compatibility pro

by Lowlytech In reply to Windows 98 and Celeron co ...

I assume you are using TCP/IP so the first thing I would check is whether you have rights on both server folders. Also check to see if you can copy files from the server folder to your PC and back to the server folder.

Collapse -

Windows 98 and Celeron compatibility pro

by marrigoni In reply to Windows 98 and Celeron co ...

The question was auto-closed by TechRepublic

Collapse -

Windows 98 and Celeron compatibility pro

by Lizzy In reply to Windows 98 and Celeron co ...

Have you checked the RAM memory, making sure it's not defective? 0028 Errors usually point to memory. Try swapping out the chips with known good ones.

Collapse -

Windows 98 and Celeron compatibility pro

by marrigoni In reply to Windows 98 and Celeron co ...

The question was auto-closed by TechRepublic

Collapse -

Windows 98 and Celeron compatibility pro

by houghton_andy In reply to Windows 98 and Celeron co ...

This may seem straight forward, but have you downloaded the latest windows 98 patches from Microsoft.

Collapse -

Windows 98 and Celeron compatibility pro

by marrigoni In reply to Windows 98 and Celeron co ...

The question was auto-closed by TechRepublic

Collapse -

Windows 98 and Celeron compatibility pro

by houghton_andy In reply to Windows 98 and Celeron co ...

Have you installed the windows 98 shutdown suppliment from Microsoft.

Collapse -

Windows 98 and Celeron compatibility pro

by marrigoni In reply to Windows 98 and Celeron co ...

The question was auto-closed by TechRepublic

Collapse -

Windows 98 and Celeron compatibility pro

by houghton_andy In reply to Windows 98 and Celeron co ...
Collapse -

Windows 98 and Celeron compatibility pro

by marrigoni In reply to Windows 98 and Celeron co ...

The question was auto-closed by TechRepublic

Back to Windows Forum
13 total posts (Page 1 of 2)   01 | 02   Next

Operating Systems Forums