General discussion

Locked

WYSE WinTerm Printing

By The Gun Doctor ·
I have several WYSE 3360SE WinTerm terminals and a Compaq server running Citrix Meta Frame on NT Terminal Server. I would like to print from the terminals to a local (attached to the terminal) printer. The WYSE web site didn't seem to help much and it seems like it would pretty straight forward, but I can't make it work. I have selected the printer from the list in the printers tab of the setup dialog, and tried enabling LPD under the "devices" tab as well. Any pointers would be very helpful.

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

WYSE WinTerm Printing

by Tomcat-2000 In reply to WYSE WinTerm Printing

When you selected the printer, did you do it for a network printer ? We tried this at some remote locations, and other than it being dog-a$$ slow, it worked. Browser for the printer in the add printer wizard (it will be attached to the station youare currently using under network printers) and it should work just fine. No LDP should be necessary (didn't need to try it). Hope this helped.

Collapse -

WYSE WinTerm Printing

by The Gun Doctor In reply to WYSE WinTerm Printing

Poster rated this answer

Collapse -

WYSE WinTerm Printing

by The Gun Doctor In reply to WYSE WinTerm Printing

the setup dialog box under the Printers tab doesn't allow me to choose between local and network printer...it only allows me to choose Com1, Com2, or LPT1. My print device (HP LJ 6L) is attached to LPT1.

Collapse -

WYSE WinTerm Printing

by The Gun Doctor In reply to WYSE WinTerm Printing

and the correct drivers for this (and all other clients) are on the server. When using a PC running the client side of Citrix Meta Frame I can print to any device on the network...just can't do it from a WinTerm.

Collapse -

WYSE WinTerm Printing

by The Gun Doctor In reply to WYSE WinTerm Printing

This question was closed by the author

Back to Networks Forum
5 total posts (Page 1 of 1)  

Hardware Forums