Question

Locked

XP repair from CD is stuck in setup loop

By pettitkelly ·
I've been trying to repair my XP from the CD and everything is fine until it gets to almost the final stages of setup. It gets close to almost making the Finalizing stage but then restarts itself. It's a never ending loop. I took out everything from the USB ports too just in case it was an external drive or something.
any clues on how to fix this? I really don't want to loose everything I have on my hard drive.
thank you

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Some thoughts

by nepenthe0 In reply to XP repair from CD is stuc ...

1) To stop the endless restart loop, boot the computer into Safe Mode by tapping the F8 key during the early boot phase (POST = Power On Self Test phase). One of the options will be the following:

Disable automatic restart on system failure

Select this with the arrow keys, hit Enter.

2) Run diagnostic software on the hard drive. It may be failing, which is why your reinstallation of Windows fails.

2a) Download the free Seagate utility:

http://tinyurl.com/yvq99t

2b) Download and install the free application CDBurnerXP:

http://cdburnerxp.se/

2c) Create a bootable CD from the Seagate iso file using the following guidelines:

http://tinyurl.com/4f3coa

2d) Run the Seagate diagnostic utility from the bootable CD you created, and determine the health of the hard drive. If the hard drive is failing, replace it, and format the new hard drive NTFS using the Seagate utility before installing Windows.

Please post back in this thread if you need further assistance. If you succeed in resolving your problem, let us know what worked for you.

Rick/Portland, OR

Back to Hardware Forum
2 total posts (Page 1 of 1)  

Hardware Forums