Questions

Can I get help fixing a 7b stop code?

Tags:
+
0 Votes
Locked

Can I get help fixing a 7b stop code?

Xzar987
I had a friend mess up my system by trying to restore it with recovery discs from a different pc running a different OS. Started getting 7b stop codes with 034's afterwards. found out the hd had some bad sectors so I replaced and still getting 7b/034's. Any way to fix this without having an OS on a fresh hd?
  • +
    0 Votes
    seanferd

    Try installing the drivers you need for your system (actually, you can't, right?), but if the HAL isn't configured properly for your CPU, etc., you're pretty much boned without the proper installation media. The likely problem is that you don't have the correct controller drivers (among others) installed, so no boot device.

    http://www.google.com/search?q=stop+0x0000007b

    +
    0 Votes
    Xzar987

    would it be possible to use the hd in say..this pc, install xp with a driver update software and reinstall in the other/run prog/success?

    +
    0 Votes
    seanferd

    But you will have to at least find the exact drivers for your drive controller and processor available on removable media to be inserted when you are offered to press F6 to install additional drivers.

    However, you are probably looking at further trouble, at least with entering the installation key or validation.

    +
    0 Votes
    johnwright25

    Be sure the following components are in your configuration:

    An IDE controller
    The Primary IDE Channel component
    The Secondary IDE Channel component
    A disk drive component
    Note Windows XP Embedded has three components that contain the name Disk Drive and three .inf files that identify their drivers with the name Disk Drive. To determine the generic disk drive component, you must inspect the properties of each component, and then select the one with the cmiPNPDevID property set to GenDisk.
    If you created a configuration based on a Target Analyzer .pmq file, verify that the run-time image is installed on the same device. If it is installed on a different device, this error may occur due to missing drivers for critical devices.

    +
    0 Votes
    seanferd

    But you will have to at least find the exact drivers for your drive controller and processor available on removable media to be inserted when you are offered to press F6 to install additional drivers.

    However, you are probably looking at further trouble, at least with entering the installation key or validation.

    +
    0 Votes
    johnwright25

    Be sure the following components are in your configuration:

    An IDE controller
    The Primary IDE Channel component
    The Secondary IDE Channel component
    A disk drive component
    Note Windows XP Embedded has three components that contain the name Disk Drive and three .inf files that identify their drivers with the name Disk Drive. To determine the generic disk drive component, you must inspect the properties of each component, and then select the one with the cmiPNPDevID property set to GenDisk.
    If you created a configuration based on a Target Analyzer .pmq file, verify that the run-time image is installed on the same device. If it is installed on a different device, this error may occur due to missing drivers for critical devices.

  • +
    0 Votes
    seanferd

    Try installing the drivers you need for your system (actually, you can't, right?), but if the HAL isn't configured properly for your CPU, etc., you're pretty much boned without the proper installation media. The likely problem is that you don't have the correct controller drivers (among others) installed, so no boot device.

    http://www.google.com/search?q=stop+0x0000007b

    +
    0 Votes
    Xzar987

    would it be possible to use the hd in say..this pc, install xp with a driver update software and reinstall in the other/run prog/success?

    +
    0 Votes
    seanferd

    But you will have to at least find the exact drivers for your drive controller and processor available on removable media to be inserted when you are offered to press F6 to install additional drivers.

    However, you are probably looking at further trouble, at least with entering the installation key or validation.

    +
    0 Votes
    johnwright25

    Be sure the following components are in your configuration:

    An IDE controller
    The Primary IDE Channel component
    The Secondary IDE Channel component
    A disk drive component
    Note Windows XP Embedded has three components that contain the name Disk Drive and three .inf files that identify their drivers with the name Disk Drive. To determine the generic disk drive component, you must inspect the properties of each component, and then select the one with the cmiPNPDevID property set to GenDisk.
    If you created a configuration based on a Target Analyzer .pmq file, verify that the run-time image is installed on the same device. If it is installed on a different device, this error may occur due to missing drivers for critical devices.

    +
    0 Votes
    seanferd

    But you will have to at least find the exact drivers for your drive controller and processor available on removable media to be inserted when you are offered to press F6 to install additional drivers.

    However, you are probably looking at further trouble, at least with entering the installation key or validation.

    +
    0 Votes
    johnwright25

    Be sure the following components are in your configuration:

    An IDE controller
    The Primary IDE Channel component
    The Secondary IDE Channel component
    A disk drive component
    Note Windows XP Embedded has three components that contain the name Disk Drive and three .inf files that identify their drivers with the name Disk Drive. To determine the generic disk drive component, you must inspect the properties of each component, and then select the one with the cmiPNPDevID property set to GenDisk.
    If you created a configuration based on a Target Analyzer .pmq file, verify that the run-time image is installed on the same device. If it is installed on a different device, this error may occur due to missing drivers for critical devices.