Questions

CISCO Router how to bypass password prompt?

+
0 Votes
Locked

CISCO Router how to bypass password prompt?

raul
Hi my company just recently purchased a CISCO 1750 router off ebay to manage their T1. I was able to load a IOS image on to the flash memory using tftp because the flash has no software on it. Now after the router boots up and does its thing I get a password prompt! is there a default password i can try or? I did try the break command in Hyperterm but I cant seem to get it to work maybe I was doing it wrong?

Thanks for the advice.

btw here is the output after i reboot the router

System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C1700 platform with 16384 Kbytes of main memory

program load complete, entry point: 0x80008000, size: 0x30b8dc
Self decompressing the image : #################################################
################################################################################
################################################################################
################################################################################
############################################################################# [O
K]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706


Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.1(27b), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Tue 16-Aug-05 18:22 by pwade
Image text-base: 0x80008088, data-base: 0x8060B4F8

cisco 1750 (MPC860) processor (revision 0x601) with 12288K/4096K bytes of memory
.
Processor board ID JAD05052AL1 (2527755131), with hardware revision 3097
M860 processor: part number 0, mask 32
Bridging software
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
4096K bytes of processor board System flash (Read/Write)

interface Serial0
^
% Invalid input detected at '^' marker.

ip address 157.130.78.146 255.255.255.252
^
% Invalid input detected at '^' marker.

no fair-queue
^
% Invalid input detected at '^' marker.

service-module t1 timeslots 1-24
^
% Invalid input detected at '^' marker.

service-module t1 remote-alarm-
^
% Invalid input detected at '^' marker.

interface Serial1
^
% Invalid input detected at '^' marker.

ip address 64.94.2.90 255.255.255.252
^
% Invalid input detected at '^' marker.

Unknown routing protocol
network 50.1.1.0 mask 255.255.255.0
^
% Invalid input detected at '^' marker.

neighbor 64.94.2.89 remote-as 14745
^
% Invalid input detected at '^' marker.

neighbor 64.94.2.89 route-map make_isp_secondary out
^
% Invalid input detected at '^' marker.

neighbor 157.130.78.145 remote-as 701
^
% Invalid input detected at '^' marker.

no auto-summary
^
% Invalid input detected at '^' marker.

ip route 0.0.0.0 0.0.0.0 Serial0
^
% Invalid input detected at '^' marker.

ip route 10.1.1.0 255.255.255.0 Serial0
^
% Invalid input detected at '^' marker.

set as-path prepend 500 500 500
^
% Invalid input detected at '^' marker.

% Warning: Next hop address is our address
transport input none
^
% Invalid input detected at '^' marker.

Press RETURN to get started!

00:00:05: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Feb 28 19:00:06: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0,
changed state to up
*Feb 28 19:00:07: %SYS-5-CONFIG_I: Configured from memory by console
*Feb 28 19:00:07: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.1(27b), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Tue 16-Aug-05 18:22 by pwade
*Feb 28 19:00:09: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0,
changed state to down