Answer for:

DHCP on my 2520 router does not work

Message 5 of 17

View entire thread
0 Votes

Router#show version
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IS-L), Version 11.3(11a)T1, RELEASE SOFTWARE (fc1
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Fri 24-Sep-99 00:12 by pwade
Image text-base: 0x0303B038, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFT
WARE (fc1)

Router uptime is 35 minutes
System restarted by power-on
System image file is "flash:c2500-is-l.113-11a.T1.bin", booted via flash

cisco 2520 (68030) processor (revision N) with 14336K/2048K bytes of memory.
Processor board ID 18254405, with hardware revision 00000003
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
2 Low-speed serial(sync/async) network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2142