Questions

hdd toshiba 400gig running on vista

Tags:
+
0 Votes
Locked

hdd toshiba 400gig running on vista

jamiereeves1
Hi there

i have a toshiba 400gig external hdd running on vista on my laptop. Now this has always worked fine, but the other day i plugged in and my laptop reconised it as a CDROM drive ? and i cannot veiw it ? normally a secure password screen comes up when i plug into usb port ! This no longer happens ? BUT can see drive in my computer BUT as CDROM ?? could anyone offer any advise of how to sort this problem out please ?
thankyou very much :)

jamie
  • +
    0 Votes
    cmiller5400

    Sounds like the drive went to the big bit bucket in heaven. Have you tried it on another machine? If it does the same thing and the data is important, take it to a data recovery warehouse. If the data was encrypted with some sort of protection, you may be SOL. Best bet is to contact the manufacturer of the hardware.

    +
    0 Votes
    jamiereeves1

    hi yeah i have tried in another machine today and still not working ? i also took out of casing and plugged into a destop and booted up and did not find any drives ??? great !! have lots of info on there i need. but when plugging it back into the case and trying it externally on lap tio it just notices it at a cdrom drive ? which i think is the sata converter chip in the casing ? any ideas how i can extract the data from this ??

    cheers
    j

    +
    0 Votes
    OH Smeg

    Safely Remove Option in Windows has not been used 1 too many times. The Partition Information on the Drive has been corrupted by incorrectly unmounting the drive.

    The solution here if the Data is Important is to pack up the Drive and send it off to a Data Recovery House to have the drive recovered. It's the only real Guarantee of getting all your Data safely back. Because this is a Self Imposed Problem the chances are very high to recover it all provided you Don't Mess with it.

    The more you mess with it the more it's going to cost to do the recovery and the less likely you are of a 100% Recovery if it is necessary.

    But if the Data would only be Nice to get back you can try one of the many Data Recovery Applications available.

    All you need do is run one of the Many Data Recovery Programs preferably one that Rebuilds the Partition Information.

    Here is a short list of the better ones but it is by no means a complete list of all the available software.

    http://tinyurl.com/273ay5

    http://tinyurl.com/rmvrv

    http://tinyurl.com/yvrsl

    http://tinyurl.com/yyk8cm

    http://tinyurl.com/382vm

    http://tinyurl.com/ynwnel

    http://tinyurl.com/nc4kx

    http://tinyurl.com/2wox7l

    http://tinyurl.com/374d8b

    http://tinyurl.com/djw6u

    http://tinyurl.com/f73se

    http://tinyurl.com/8bd3f

    http://tinyurl.com/afu2j

    While the last 2 are from the same company they are very different products. Win Hex should only be considered for use by someone who knows Hex Inside Out while Davory is a great cheap General Purpose Application.

    Personally I prefer the On Track Option but it's anything but cheap. However because I use this type of software a lot it's paid for itself many times over by now, for a cheaper option Spin Rite from Gibson Research or Stella have both very good reputations by other TR members.

    Col

    +
    0 Votes
    OH Smeg

    Look in Drive or Disc Management and see how this device appears there. I just forget the exact wording under Vista and I don't have a Vista unit here to look on.

    It quite possibly is because the Safely Remove Option in Windows has not been used one too many times and the Partition tables have been corrupted but until you look at the actual Device in Disc and or Drive Management it's impossible to say what's going on here.

    Can you try this in another computer to check it's function?

    Col

  • +
    0 Votes
    cmiller5400

    Sounds like the drive went to the big bit bucket in heaven. Have you tried it on another machine? If it does the same thing and the data is important, take it to a data recovery warehouse. If the data was encrypted with some sort of protection, you may be SOL. Best bet is to contact the manufacturer of the hardware.

    +
    0 Votes
    jamiereeves1

    hi yeah i have tried in another machine today and still not working ? i also took out of casing and plugged into a destop and booted up and did not find any drives ??? great !! have lots of info on there i need. but when plugging it back into the case and trying it externally on lap tio it just notices it at a cdrom drive ? which i think is the sata converter chip in the casing ? any ideas how i can extract the data from this ??

    cheers
    j

    +
    0 Votes
    OH Smeg

    Safely Remove Option in Windows has not been used 1 too many times. The Partition Information on the Drive has been corrupted by incorrectly unmounting the drive.

    The solution here if the Data is Important is to pack up the Drive and send it off to a Data Recovery House to have the drive recovered. It's the only real Guarantee of getting all your Data safely back. Because this is a Self Imposed Problem the chances are very high to recover it all provided you Don't Mess with it.

    The more you mess with it the more it's going to cost to do the recovery and the less likely you are of a 100% Recovery if it is necessary.

    But if the Data would only be Nice to get back you can try one of the many Data Recovery Applications available.

    All you need do is run one of the Many Data Recovery Programs preferably one that Rebuilds the Partition Information.

    Here is a short list of the better ones but it is by no means a complete list of all the available software.

    http://tinyurl.com/273ay5

    http://tinyurl.com/rmvrv

    http://tinyurl.com/yvrsl

    http://tinyurl.com/yyk8cm

    http://tinyurl.com/382vm

    http://tinyurl.com/ynwnel

    http://tinyurl.com/nc4kx

    http://tinyurl.com/2wox7l

    http://tinyurl.com/374d8b

    http://tinyurl.com/djw6u

    http://tinyurl.com/f73se

    http://tinyurl.com/8bd3f

    http://tinyurl.com/afu2j

    While the last 2 are from the same company they are very different products. Win Hex should only be considered for use by someone who knows Hex Inside Out while Davory is a great cheap General Purpose Application.

    Personally I prefer the On Track Option but it's anything but cheap. However because I use this type of software a lot it's paid for itself many times over by now, for a cheaper option Spin Rite from Gibson Research or Stella have both very good reputations by other TR members.

    Col

    +
    0 Votes
    OH Smeg

    Look in Drive or Disc Management and see how this device appears there. I just forget the exact wording under Vista and I don't have a Vista unit here to look on.

    It quite possibly is because the Safely Remove Option in Windows has not been used one too many times and the Partition tables have been corrupted but until you look at the actual Device in Disc and or Drive Management it's impossible to say what's going on here.

    Can you try this in another computer to check it's function?

    Col