Questions

linking two laptops

Tags:
+
0 Votes
Locked

linking two laptops

charlesvanriper
Looking to link two laptops together so I can load sopme of my software onto my slimline laptop that does not have a cd rom drive.
I have a Compaq presario with cd romm and a Toshiba R100 without a cd rom, can someone please help.
  • +
    0 Votes
    The Scummy One

    and then share the cd drive out and map to it from the second system

    +
    0 Votes
    chris.black

    Afternoon,
    The previous reply is correct. You need to get an Ethernet Cross over cable.
    Which is one side 568-A and the other 568-B.
    Or easy id of wires from left to right -
    Side 1: WO, O, WG, WB, B, G, WB, B
    Side 2: WG, G, WO, WB, B, O, WB, B

    Then build a small network between the two computers. Make sure the two computers are in the same subnet.
    Computer 1: 10.1.1.1 255.255.255.0
    Computer 2: 10.1.1.2 255.255.255.0

    Last step would be to share out the two drives in windows so you can surf to them from explorer.
    net use \\10.1.1.x\shared-drive-letter m:

    That should work.

    +
    0 Votes
    charlesvanriper

    Thx for the info Chris just a little more help, I have the crossover ethernet cable
    I have both computers connected do I have to reboot them?
    I need to rt click network places then get to IP adress right, enter what for the Ip addresses for each computer then include these subnets.
    Now how do you share out the cd drive in the Compaq to gain access to it from the toshiba.

    +
    0 Votes
    OH Smeg

    All that should be required is to right click on the CD Rom Drive and scroll down the menu till you come to sharing. Left Click on Sharing then the next option that tells you about Security and enable sharing on the Optical Drive.

    Col

    +
    0 Votes
    charlesvanriper

    cool, as for the #'s for the ip address what do you recommend?
    Sorry but this is real confusing but I will not learn without trying, never set up a network before.
    This step is confusing me, Last step would be to share out the two drives in windows so you can surf to them from explorer ( explorer you mean to rt click start ) and use \\10.1.1.x\shared-drive-letter m:( is this the Share name for the box listed in sharing & security?
    Thx for all your help Chris

    +
    0 Votes
    OH Smeg

    And you are correct once you share the Optical Drive you should be able to see it from the other computer in either Explorer or My Computer.

    Col

    +
    0 Votes
    charlesvanriper

    I connected the cable, then ran tthe setup home network wizard, set the ip addresses for windows to search, then set the CD rom for sharing ( I think I did this one right )set the folder to network sharing, the name box just has the letter D and it will not let me change it.
    then I did the same thing on the new laptop I put in the letter D in the name box,
    the network name is MSHOME but when I click on that name in explore it tells me I am not the administrator, although I am logged into that account ( I did not set up a password for administrator )and cannot access MSHOME?
    At this point I am lost, anyone have a suggestion.

    Charlie

    +
    0 Votes
    OH Smeg

    Also what Security have you got in place?

    Col

    +
    0 Votes
    OldER Mycroft

    The box that you put the letter 'D' in, in the new laptop, is for the name of the computer on the network. It HAS to be a different name, so that the network consists of TWO identities (A to B, rather than A to A [which doesn't make any sense]).

    I'd also add that you will probably have more luck if you change the name of the network. For some odd reason, Microsoft networks usually work better if they are NOT CALLED 'mshome'. Give both laptops the same network name but not 'mshome'. Then run the Network Setup Wizard.

    Don't forget, make the CD-equipped laptop the 'HOST' and the other laptop the 'GUEST'. The GUEST can access the HOST easier that way.

    I'd forget the IPs and the Subnets - let the wizard sort that out for you.


    Good luck.

  • +
    0 Votes
    The Scummy One

    and then share the cd drive out and map to it from the second system

    +
    0 Votes
    chris.black

    Afternoon,
    The previous reply is correct. You need to get an Ethernet Cross over cable.
    Which is one side 568-A and the other 568-B.
    Or easy id of wires from left to right -
    Side 1: WO, O, WG, WB, B, G, WB, B
    Side 2: WG, G, WO, WB, B, O, WB, B

    Then build a small network between the two computers. Make sure the two computers are in the same subnet.
    Computer 1: 10.1.1.1 255.255.255.0
    Computer 2: 10.1.1.2 255.255.255.0

    Last step would be to share out the two drives in windows so you can surf to them from explorer.
    net use \\10.1.1.x\shared-drive-letter m:

    That should work.

    +
    0 Votes
    charlesvanriper

    Thx for the info Chris just a little more help, I have the crossover ethernet cable
    I have both computers connected do I have to reboot them?
    I need to rt click network places then get to IP adress right, enter what for the Ip addresses for each computer then include these subnets.
    Now how do you share out the cd drive in the Compaq to gain access to it from the toshiba.

    +
    0 Votes
    OH Smeg

    All that should be required is to right click on the CD Rom Drive and scroll down the menu till you come to sharing. Left Click on Sharing then the next option that tells you about Security and enable sharing on the Optical Drive.

    Col

    +
    0 Votes
    charlesvanriper

    cool, as for the #'s for the ip address what do you recommend?
    Sorry but this is real confusing but I will not learn without trying, never set up a network before.
    This step is confusing me, Last step would be to share out the two drives in windows so you can surf to them from explorer ( explorer you mean to rt click start ) and use \\10.1.1.x\shared-drive-letter m:( is this the Share name for the box listed in sharing & security?
    Thx for all your help Chris

    +
    0 Votes
    OH Smeg

    And you are correct once you share the Optical Drive you should be able to see it from the other computer in either Explorer or My Computer.

    Col

    +
    0 Votes
    charlesvanriper

    I connected the cable, then ran tthe setup home network wizard, set the ip addresses for windows to search, then set the CD rom for sharing ( I think I did this one right )set the folder to network sharing, the name box just has the letter D and it will not let me change it.
    then I did the same thing on the new laptop I put in the letter D in the name box,
    the network name is MSHOME but when I click on that name in explore it tells me I am not the administrator, although I am logged into that account ( I did not set up a password for administrator )and cannot access MSHOME?
    At this point I am lost, anyone have a suggestion.

    Charlie

    +
    0 Votes
    OH Smeg

    Also what Security have you got in place?

    Col

    +
    0 Votes
    OldER Mycroft

    The box that you put the letter 'D' in, in the new laptop, is for the name of the computer on the network. It HAS to be a different name, so that the network consists of TWO identities (A to B, rather than A to A [which doesn't make any sense]).

    I'd also add that you will probably have more luck if you change the name of the network. For some odd reason, Microsoft networks usually work better if they are NOT CALLED 'mshome'. Give both laptops the same network name but not 'mshome'. Then run the Network Setup Wizard.

    Don't forget, make the CD-equipped laptop the 'HOST' and the other laptop the 'GUEST'. The GUEST can access the HOST easier that way.

    I'd forget the IPs and the Subnets - let the wizard sort that out for you.


    Good luck.