Questions

Networks

+
0 Votes
Locked

Networks

jjsu233
Any one can tell me how to connect the Thomson SpeedTouch 536 v6 Modem(wired) ADSL2+Gateway to TL-WR740N 150M wireless Router including their settings . Thanks ! JJ
  • +
    0 Votes
    OH Smeg

    With the ISP and then plug it into the Uplink Port of the WiFi Router and with a wired connection setup the router again with a wired connection.

    After the router is setup you can connect to it wirelessly after applying the Security Settings that you started with in the Router to the Conencted Computers.

    As to how to setup the Modem this All Depends on the ISP and how to setup the Router this All Depends on what Security is used and how many systems need to be connected at the same time. This will all be in the ISP User Help and the Routers Setup Sections.

    Col

    +
    0 Votes
    jjsu233

    Thank you for your instruction. I am not quite understand your explanation because I am not a PC savvy, could you please explain to me more detail and step by step like connections from where to where ? etc., please use common tech name like on router & modem(Wan, Lan, Ethernet, DSL ,etc. not like UpLink Port, Is it Wan on router? etc. . I also have a problem, before the Router connecting to PC, everything is Ok(Internet, Lan, outlook express etc.) after connected to the Router, the Internet lost, and the OutLook Express shown Error 0x8000CCC0D, Your advice Please !

    +
    0 Votes
    OH Smeg

    You plug the Modem into the Connection and Power and then the Ethernet Cable goes to the computer where you use the Setup Procedure to connect to the ISP.

    When this is done run the Ethernet Cable from the Modem to the Uplink Port of the Router. This is labeled on the back of the router and is a separate Ethernet Connection.

    When the Router is connected to the Modem plug in another Ethernet cable and connect this tot he computer again. Run the Routers Setup Procedure to establish the Security and if you need the Wireless and Wired LAN's to communicate Bridge the different LAN's.

    When the Router is Setup if you want this computer to connect tirelessly unplug it from the Ethernet cable and setup the WiFi Connection.

    Col

    +
    0 Votes
    jjsu233

    Dear OH Smeg : My problem has been solved, thank you for your help
    JJ

    +
    0 Votes
    jjsu233

    I bought a Chinese Writing Pad in China, after installation, the PC showing unreadable symbol, anyone knows how to make it readable, for your information : my PC is XP, SP3. the Writing Pad is QianCai DJJ-7. Thanks !
    JJ
    My PC is English Version, do not know if it is compatible with the Writing Pad for use in China?


    JJ

  • +
    0 Votes
    OH Smeg

    With the ISP and then plug it into the Uplink Port of the WiFi Router and with a wired connection setup the router again with a wired connection.

    After the router is setup you can connect to it wirelessly after applying the Security Settings that you started with in the Router to the Conencted Computers.

    As to how to setup the Modem this All Depends on the ISP and how to setup the Router this All Depends on what Security is used and how many systems need to be connected at the same time. This will all be in the ISP User Help and the Routers Setup Sections.

    Col

    +
    0 Votes
    jjsu233

    Thank you for your instruction. I am not quite understand your explanation because I am not a PC savvy, could you please explain to me more detail and step by step like connections from where to where ? etc., please use common tech name like on router & modem(Wan, Lan, Ethernet, DSL ,etc. not like UpLink Port, Is it Wan on router? etc. . I also have a problem, before the Router connecting to PC, everything is Ok(Internet, Lan, outlook express etc.) after connected to the Router, the Internet lost, and the OutLook Express shown Error 0x8000CCC0D, Your advice Please !

    +
    0 Votes
    OH Smeg

    You plug the Modem into the Connection and Power and then the Ethernet Cable goes to the computer where you use the Setup Procedure to connect to the ISP.

    When this is done run the Ethernet Cable from the Modem to the Uplink Port of the Router. This is labeled on the back of the router and is a separate Ethernet Connection.

    When the Router is connected to the Modem plug in another Ethernet cable and connect this tot he computer again. Run the Routers Setup Procedure to establish the Security and if you need the Wireless and Wired LAN's to communicate Bridge the different LAN's.

    When the Router is Setup if you want this computer to connect tirelessly unplug it from the Ethernet cable and setup the WiFi Connection.

    Col

    +
    0 Votes
    jjsu233

    Dear OH Smeg : My problem has been solved, thank you for your help
    JJ

    +
    0 Votes
    jjsu233

    I bought a Chinese Writing Pad in China, after installation, the PC showing unreadable symbol, anyone knows how to make it readable, for your information : my PC is XP, SP3. the Writing Pad is QianCai DJJ-7. Thanks !
    JJ
    My PC is English Version, do not know if it is compatible with the Writing Pad for use in China?


    JJ