Questions

password on system setup boot

Tags:
+
0 Votes
Locked

password on system setup boot

ishbu22
i have a asus mother board a few years old I haven't messed with it in a wile i want to wipe it clean. When i go to access the system setup to select cd-rom to boot first it asks me for a password i have no idea what it would be also i have a raid on the hard drives how do i delete it. the reason for wiping it clean im putting a new OS on it
  • +
    0 Votes
    Darryl~ Moderator

    The members of TechRepublic - A Resource for IT Professionals, will not assist anyone in the recovery of lost passwords. You may have a legitimate reason to recover a password. However, we cannot verify your motives and will therefore not assist anyone in what may be an attempt at gaining unauthorized access to a computer system. Due to the open nature of this forum, any assistance given to help circumvent security measures, even for legitimate purposes, would be available for unscrupulous individuals to use for illegitimate purposes. This is a risk that we the members of TechRepublic will not take. Please do not ask questions of this nature on TechRepublic.

    If you have a legitimate need to circumvent a password scheme, please contact the vendor for the software / hardware and request their assistance. E.g. Windows XP password recovery issues should be taken up with Microsoft's technical support, Phoenix BIOS password recovery issues should be taken up with Phoenix Technologies, etc.. To those viewing this post: Please DO NOT respond any further to this thread.

    This template has been released under the GNU public license and you are encouraged to use it as a standard reply for questions of similar nature, provided that you make any modifications available to other users.

    +
    0 Votes
    HAL 9000 Moderator

    You should start looking at where you write your Passwords down, that way you'll be able to get into the BIOS.

    I however don't understand how you wipe any M'Board Clean and the only thing with anything relating to code on it is the CMOS Chip and deleting the files on that will render the M'Board unusable.

    If you want to clean off the Silk Screen Printing on the M'Board to clean it that will also have a adverse effect on the workings of the thing.

    Also no M'Board on the face of the planet can possibly contain a RAID Array. RAID = Redundant Array of Independent Disks so to have a RAID it has to have Hard Disc Drives.

    So what exactly are you asking here? You have asked about a M'Board and then started adding things to it which is not related tot he original question.

    You could however Read the Manual that comes with the ASUS M'Board or if you have lost that you can download it from here but you'll need to know the Model of it which is Silk Screened onto the M'Board on all ASUS M'Boards.

    http://support.asus.com/download/download.aspx?SLanguage=en-us

    As for wiping the RAID you'll need to hit the HDD with a Wiping Utility like Boot & Nuke

    http://www.dban.org/

    Or Kill Disc

    http://www.killdisk.com/downloadfree.htm

    When you read the Manual pay particular attention to the section covering the BIOS Settings and look at the Jumper Settings also to fix the rest.

    Col

    +
    0 Votes
    statykserver

    I remember a long time ago this command that would clear the cmos settings:

    Get DOS prompt and type:
    DEBUG hit enter
    -o 70 2e hit enter
    -o 71 ff hit enter
    -q hit enter
    exit hit enter

    However I had to pull that from some old notes and don't know if that will work on newer systems so use at your own risk.

    You might just have to buy another motherboard if you can't remember it.

    I have an Asus P6t that also has some raid options on it but I just didn't have a chance to play around with it at the time. I might try it again sometime.

    Good Luck

    +
    0 Votes
    dldorrance

    Works for me as I do not set a password for the BIOS.

  • +
    0 Votes
    Darryl~ Moderator

    The members of TechRepublic - A Resource for IT Professionals, will not assist anyone in the recovery of lost passwords. You may have a legitimate reason to recover a password. However, we cannot verify your motives and will therefore not assist anyone in what may be an attempt at gaining unauthorized access to a computer system. Due to the open nature of this forum, any assistance given to help circumvent security measures, even for legitimate purposes, would be available for unscrupulous individuals to use for illegitimate purposes. This is a risk that we the members of TechRepublic will not take. Please do not ask questions of this nature on TechRepublic.

    If you have a legitimate need to circumvent a password scheme, please contact the vendor for the software / hardware and request their assistance. E.g. Windows XP password recovery issues should be taken up with Microsoft's technical support, Phoenix BIOS password recovery issues should be taken up with Phoenix Technologies, etc.. To those viewing this post: Please DO NOT respond any further to this thread.

    This template has been released under the GNU public license and you are encouraged to use it as a standard reply for questions of similar nature, provided that you make any modifications available to other users.

    +
    0 Votes
    HAL 9000 Moderator

    You should start looking at where you write your Passwords down, that way you'll be able to get into the BIOS.

    I however don't understand how you wipe any M'Board Clean and the only thing with anything relating to code on it is the CMOS Chip and deleting the files on that will render the M'Board unusable.

    If you want to clean off the Silk Screen Printing on the M'Board to clean it that will also have a adverse effect on the workings of the thing.

    Also no M'Board on the face of the planet can possibly contain a RAID Array. RAID = Redundant Array of Independent Disks so to have a RAID it has to have Hard Disc Drives.

    So what exactly are you asking here? You have asked about a M'Board and then started adding things to it which is not related tot he original question.

    You could however Read the Manual that comes with the ASUS M'Board or if you have lost that you can download it from here but you'll need to know the Model of it which is Silk Screened onto the M'Board on all ASUS M'Boards.

    http://support.asus.com/download/download.aspx?SLanguage=en-us

    As for wiping the RAID you'll need to hit the HDD with a Wiping Utility like Boot & Nuke

    http://www.dban.org/

    Or Kill Disc

    http://www.killdisk.com/downloadfree.htm

    When you read the Manual pay particular attention to the section covering the BIOS Settings and look at the Jumper Settings also to fix the rest.

    Col

    +
    0 Votes
    statykserver

    I remember a long time ago this command that would clear the cmos settings:

    Get DOS prompt and type:
    DEBUG hit enter
    -o 70 2e hit enter
    -o 71 ff hit enter
    -q hit enter
    exit hit enter

    However I had to pull that from some old notes and don't know if that will work on newer systems so use at your own risk.

    You might just have to buy another motherboard if you can't remember it.

    I have an Asus P6t that also has some raid options on it but I just didn't have a chance to play around with it at the time. I might try it again sometime.

    Good Luck

    +
    0 Votes
    dldorrance

    Works for me as I do not set a password for the BIOS.