Questions

Point to Point t1 Cisco 1841 File Sharing

Tags:
+
0 Votes
Locked

Point to Point t1 Cisco 1841 File Sharing

jeremy
Hello All,

I have a point-to-point t1 that I have a Cisco 1841 at each location. I can ping all interfaces on each router from both sides. I can even ping various computers on each side from the other side. I just can't seem to share files from one computer to another. Below I have the configs from both routers. Any help is greatly appreciated.

Thanks!

RouterA#show config
Using 2149 out of 196600 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname RouterA
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
enable password *
!
no aaa new-model
!
resource policy
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
--More--
*Dec 6 23:11:00.851: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed sip subnet-zero
ip cef
!
!
no ip dhcp use vrf connected
!
!
ip domain name yourdomain.com
!
username cisco privilege 15 secret 5 *
username * password 0 *
!
!
!
interface FastEthernet0/0
description LAN
ip address 192.168.254.2 255.255.255.0
speed auto
full-duplex
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/0/0
ip address 192.168.250.253 255.255.255.252
no ip route-cache cef
no ip route-cache
service-module t1 timeslots 1-24
!
ip default-gateway 192.168.254.1
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.254.1
ip route 192.168.162.0 255.255.255.0 192.168.250.254
!
no ip http server
ip http authentication local
ip http timeout-policy idle 60 life 86400 requests 10000
!
!
control-plane
!
banner login ^C
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege level of 15.

Please change these publicly known initial credentials using SDM or the IOS CLI.
Here are the Cisco IOS commands.

username <myuser> privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want to use.

For more information about SDM please follow the instructions in the QUICK START
GUIDE for your router or go to http://www.cisco.com/go/sdm
-----------------------------------------------------------------------
^C
!
line con 0
login local
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet
line vty 5 15
privilege level 15
login local
transport input telnet
!
end

RouterA#exit

[Connection to 192.168.254.2 closed by foreign host]
RouterB#show config
Using 2264 out of 196600 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname RouterB
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
enable password *
!
no aaa new-model
!
resource policy
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
ip cef
!
!
no ip dhcp use vrf connected
!
!
ip domain name yourdomain.com
!
username cisco privilege 15 secret 5 *
username * password 0 *
!
!
!
interface FastEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0$
ip address 192.168.162.2 255.255.255.0
speed auto
full-duplex
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/0/0
ip address 192.168.250.254 255.255.255.252
no ip route-cache cef
no ip route-cache
no fair-queue
service-module t1 clock source internal
service-module t1 timeslots 1-24
!
ip default-gateway 192.168.162.1
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.162.1
ip route 192.168.254.0 255.255.255.0 192.168.250.253
!
ip http server
ip http access-class 23
ip http authentication local
ip http timeout-policy idle 60 life 86400 requests 10000
!
!
control-plane
!
banner login ^C
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege level of 15.

Please change these publicly known initial credentials using SDM or the IOS CLI.
Here are the Cisco IOS commands.

username <myuser> privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want to use.

For more information about SDM please follow the instructions in the QUICK START
GUIDE for your router or go to http://www.cisco.com/go/sdm
-----------------------------------------------------------------------
^C
!
line con 0
login local
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet
line vty 5 15
privilege level 15
login local
transport input telnet
!
end

RouterB#