sh dls int atm0 - output help - Cisco ADSL router

0 Votes

sh dls int atm0 - output help - Cisco ADSL router

Hi - Does anyone know where I can get a detailed explanation of the output of sh dsl int atm0 command on cisco dsl router? Cisco's web site doesn't really tell you much. I'm keen to understand things like capacity used - any relation to bandwith used?, ideal values for Attenuation and noise levels.

Modem Status: Showtime (DMTDSL_SHOWTIME)
DSL Mode: ITU G.992.1 (G.DMT) Annex A
ITU STD NUM: 0x02 0x2
Vendor ID: 'ALCB' 'P '
Vendor Specific: 0x0000 0x0000
Vendor Country: 0x00 0xB5
Capacity Used: 13% 34%
Noise Margin: 31.0 dB 25.0 dB
Output Power: 15.0 dBm 11.5 dBm
Attenuation: 47.0 dB 30.0 dB
Defect Status: None None
Last Fail Code: None
Watchdog Counter: 0x80
Watchdog Resets: 0
Selftest Result: 0x00
Subfunction: 0x00
Interrupts: 7711 (0 spurious)
PHY Access Err: 0
Activations: 1
LED Status: ON
LED On Time: 100
LED Off Time: 100