Questions

touch pad(mouse) and quick launch buttons are not working?

Tags:
+
0 Votes
Locked

touch pad(mouse) and quick launch buttons are not working?

ehtisham.andrabi
I am using HP DV 6570EE , my touch pad(mouse) and quick launch buttons are not working,
there is no sound also...though all drivers seem to be installed
cant understand what is wrong...earlier the laptop had been repaired,, with some motherboard probs,, is it related to that...
or a harddisk problem..

keyboard also doesnt work ..needs a restart for the buttons to wrk
  • +
    0 Votes
    OH Smeg

    Did this work previously and it's stopped working or has it never worked since the repair?

    How long has the sound not been working also?

    If it's stopped since the repair then most likely there is a Hardware Issue and most likely the M???Board is the problem not the HDD but if it hasn't worked since being repaired it's possible that the unit was never reimaged correctly or that something different has been installed and the wrong drivers have been applied.

    Anyway you should not have accepted it's return without it working properly or immediately returned it to the repairer with a fault list.

    So assuming that it's suddenly stopped working and that the unit has not been exposed to Moisture the most obvious thing is a Hardware Failure in which case it need to be returned to it's Makers Representative for repair.

    Col

    +
    0 Votes
    ehtisham.andrabi

    yes you are right.. the volume/quick launch/. mouse pad have not been working since the machine got repaired..
    was just curious if any wire or connection wasnt done properly

    +
    0 Votes
    OH Smeg

    I would return it to the place that did the repairs and get them to fix it properly.

    Whatever they have done here is the problem.

    Col

    +
    0 Votes
    rjluvkc

    Can you attach a usb mouse and will that work? If so, I bet its a device driver that is corrupted.

    +
    0 Votes
    ehtisham.andrabi

    the usb mouse works well

    +
    0 Votes
    rjluvkc

    Have you checked device manager to see if any drivers are in error?

    +
    0 Votes
    ehtisham.andrabi

    no error ,,,,seems alll well there...

    +
    0 Votes
    restbyte

    Hi
    1. I don't no what they are for HP and they could be different for different laptops but there is probably a key combination that re-enables the touchpad, try searching HP touchpad enable or disable..
    2. look in the control panel under mouse, see if the touchpad is disabled.
    If you don't see any reference to the touch pad, you probably need to re-install the driver.
    3. Get the disk or go to the HP euro site, support and follow the prompts to identify your laptop.
    . find, download, Install the driver.

    Function keys I am not sure about.

    +
    0 Votes
    ehtisham.andrabi

    windows has detected that the audio enhancements for the following device are causing problem speakers conexant high defintiion smart audio'

    sound problem tooo

  • +
    0 Votes
    OH Smeg

    Did this work previously and it's stopped working or has it never worked since the repair?

    How long has the sound not been working also?

    If it's stopped since the repair then most likely there is a Hardware Issue and most likely the M???Board is the problem not the HDD but if it hasn't worked since being repaired it's possible that the unit was never reimaged correctly or that something different has been installed and the wrong drivers have been applied.

    Anyway you should not have accepted it's return without it working properly or immediately returned it to the repairer with a fault list.

    So assuming that it's suddenly stopped working and that the unit has not been exposed to Moisture the most obvious thing is a Hardware Failure in which case it need to be returned to it's Makers Representative for repair.

    Col

    +
    0 Votes
    ehtisham.andrabi

    yes you are right.. the volume/quick launch/. mouse pad have not been working since the machine got repaired..
    was just curious if any wire or connection wasnt done properly

    +
    0 Votes
    OH Smeg

    I would return it to the place that did the repairs and get them to fix it properly.

    Whatever they have done here is the problem.

    Col

    +
    0 Votes
    rjluvkc

    Can you attach a usb mouse and will that work? If so, I bet its a device driver that is corrupted.

    +
    0 Votes
    ehtisham.andrabi

    the usb mouse works well

    +
    0 Votes
    rjluvkc

    Have you checked device manager to see if any drivers are in error?

    +
    0 Votes
    ehtisham.andrabi

    no error ,,,,seems alll well there...

    +
    0 Votes
    restbyte

    Hi
    1. I don't no what they are for HP and they could be different for different laptops but there is probably a key combination that re-enables the touchpad, try searching HP touchpad enable or disable..
    2. look in the control panel under mouse, see if the touchpad is disabled.
    If you don't see any reference to the touch pad, you probably need to re-install the driver.
    3. Get the disk or go to the HP euro site, support and follow the prompts to identify your laptop.
    . find, download, Install the driver.

    Function keys I am not sure about.

    +
    0 Votes
    ehtisham.andrabi

    windows has detected that the audio enhancements for the following device are causing problem speakers conexant high defintiion smart audio'

    sound problem tooo