Answer for:

Using Linksys router to add wireless to cable network

Message 7 of 15

View entire thread
0 Votes

"The other options are PPPoE, PPTP, L2TP & Telstra Cable, none of which seem likely, as they all require a password & username."

You will have to check this out with your ISP to determine which line you have, when you have found that out then you will be able to select this in your Router. Some ISP's recommend that "DHCP" is marked "enable" in your router. From there you will have to set up the connection with your computers one by one, you will need a User name and password to access the internet. As for a User name and password for your router is a good choice also, Unless it is static on Admin for your User name, but the password you should put in your router to lock it down.

Please post back if you have any more problems or questions.